Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
49
Figure 46 Enumerated Control (Icon)
The parameters available are:
 # Enums: number of states (up to 6) that will be distinguished. For every
distinguished state, the parameters Value and Icon will become available,
in order to relate every significant value of the communication object to a
certain icon that will represent it.
 Value j: numerical value (0 – 255) that will be sent through the control
object when the user, after pressing the buttons, sets the control box to
state j.
 Icon j: indicative icon that will be displayed in the box when the status
object (which gets automatically updated whenever a control order is sent,
although it may also receive values from the bus) acquires the numerical
value defined in the above parameter.
d) Enumerated Control (Text)
The box will behave analogously to the case of the Binary control (Text)
however it will be possible to distinguish up to 6 states (configurable through
the # Enums parameter) instead of only two. The states will be determined by
the reception of any values between 0 and 255, as the control ([Pn][Bi]
Enumerated Control) and the status ([Pn][Bi] Enumerated Indicator) objects
are not binary but 1-byte objects.