Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
47
As a general rule, most of the 2-button controls permit configuring a pair of parameters,
Left button and Right button, each containing a dropdown list for the selection of the
desired icons to be displayed inside the buttons in the box.
Notes:
A list with all the icons available in Z41 can be found in document “Z41 Icon
list”, available at www.zennio.com.
When multiple presses are made consecutively on the buttons of a control
that regulates (e.g. increases / decreases) the value of a certain status, only
the final value selected by the user will be sent to the bus, to prevent an
unnecessary bus traffic due to all the intermediate values
On the other hand, the Function parameter contains a dropdown list for the selection
of the particular two-button control type to be implemented by the box. The available
options (and their related parameters) are:
a) Binary Control (Icon)
Figure 44 Binary Control (Icon)
When the user touches the buttons, a binary value will be sent through the
[Pn][Bi] Binary control object, while the status object, [Pn][Bi] Binary
indicator, will determine the icon shown in the box.
The parameters available are:
 Action: sets the value to be sent on button touches. This can be “Left 0,
Right 1” (by default) or “Left 1, Right 0”.