Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
44
3.4.2.2 1-BUTTON CONTROL
Boxes configured as 1-button controls show one centred button and a title.
Figure 39 1-Button Control (Box)
The desired function must be selected through the Function parameter. The available
functions and the parameters related to each are:
a) Binary Control
The central button of the box will react to user presses by sending a binary
value to the bus through the [Pn][Bi] Binary control object, which turns visible
as soon as this function is assigned to the box.
Figure 40 Binary control
On the other hand, Action permits setting what value will be sent to the bus
through the mentioned object, and on what events. The options are:
• Toggle: pressing the button will cause an alternating sending of the
values “1” and “0”. Particularly, on the first press one “1” will be sent; on
the second, one “0”; on the third, one “1”; and so on.
• 0: one “0” will be sent whenever the button is pressed.
• 1: one “1” will be sent whenever the button is pressed.
• Short 1 – Long 0: short presses will trigger the sending of the value “1”,
while long presses will trigger the sending of the value “0”.
• Short 0 – Long 1: inverse to the previous case.