Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
37
3.4 PAGE n
When any of the general-purpose pages is enabled from the Configuration screen
under the Menu tab, a new tab named Page n will appear, where n is the number of
the page.
Under this tab, one screen (Configuration) will be initially displayed to let the
integrator enable or disable any of the boxes in the page. Depending on that, more
parameter screens will appear.
Note: figures in this section will show the parameters of a certain page (for instance,
page 1) or a certain box (for instance, box 1). The parameters for other pages or boxes
are totally analogous.
3.4.1 CONFIGURATION
Figure 28 Configuration (Page n)
This screen contains the following parameters:
Title: text field that sets the title shown on the top of the Menu page.
Automatic Page Shaping: dropdown list that allows choosing whether the
boxes in the Menu page should be automatically distributed (option “Yes”)
depending on the number of boxes configured, or be displayed as a static 2x4
grid (option “No”). See section 2.6.