Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
34
3.2.7 WHITE-CHANNEL OBJECTS
Figure 24 White-Channel Objects (Main Configuration)
This screen contains four checkboxes that allow the integrator to enable or disable up
to four 1-byte communication objects independently, named [RGBW] White Channel
x, through which regulation orders (expressed as percentage values) may be sent to
the white colour channels of one or more RGBW light dimmers.
For further information about the usage of these objects and about the per-channel
dimming controls implemented by Z41, please refer to epigraph b) in section 3.4.2.5.
3.2.8 FIRMWARE UPDATE
Figure 25 Firmware Update
This tab lets the integrator enable or disable, independently, the device firmware
update functions (see section 1.3.1) through the Ethernet or USB ports. The only two
parameters are:
USB Updating: “Enabled” (default option) or “Disabled”.
Network Updating: “Enabled” (default option), “Disabled” or “Enabled
(Password Protected)”. The latter brings the option to restrict the updates via
Ethernet to those who can provide the required password to the update tool