Operation Manual

InZennio Z41
http://www.zennio.com Tecnical Support: http://support.zennio.com
28
Important: the password insertion dialog features a specific option (lower left
button) that lets the user change, in runtime, the passwords originally set by
parameter. After accessing this option and prior to typing the new password,
the user will be required to type the corresponding old password (level 1 or
level 2). Note that although it will be possible to type password 2 even if the
device asks for password 1, the new password typed afterwards will be
anyway stored as the new password for level 1.
Figure 17 Two Security Levels
Security Pad Labels: parameter consisting in six additional textboxes,
intended for the customisation of the messages that the device shows (or
may show) when the user interacts with the password insertion dialog. Up to
15 characters are permitted per label.
 Label for “Password 1”: message shown when the user is required to
type in the password for level 1. By default, “Password 1”.
 Label for “Password 2”: message shown when the user is required to
type in the password for level 2. By default, “Password 2”.
 Label for “Error”: message shown to the user when the typed password
is not valid. By default, “ERROR”.
 Label for “New password”: message shown to ask the user for a new
password, during the password change process. By default, “New
password”.