Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com
40
40
Figure 3.19. Configuration page aspect
3.4. INPUTS
Z38i has 4 binary inputs to be configured as push button o switch/sensor, connecting the
corresponding devices.
Once the input is enabled, the access to the corresponding configuration window appears in the
main menu according to the configured type of input.
3.4.1. PUSH BUTTON
A push button connected to an input consists of a device, which allows, or not, the current
flow while this is being pushed; in normal conditions, push buttons contacts are always open. This
event is a pulsation and the time it lasts, threshold time.
Depending on the “Threshold Time” it can be distinguished two different actions: Short press or
Long press.
Typical key press devices, as keyboards, are used to be configured as push button inputs.