Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com

3.3.4. CONFIGURATION PAGE

This is a specific page where the user can adjust some basic parameters of the screen (time,

date, contrast, etc.).

Figure 3.18. Configuration page

All of them have the parametrizable field "Name", which allows associating a name to the

corresponding box in the page. (11 free characters are available to set the name).

Next, the different function of each box in the “Configuration Page” is described.

Note: The disabled boxes are configured as blank boxes in the Page.

BOX 1 (Programming button): When programming a device physical address, users

can set the “Programming Mode” directly from this box. This characteristic makes this process

easier as the user won’t need to access the rear side of the panel to push the “Programming

Button” any more.

BOX 2 (Time setting): This box allows setting the time in the Touch Panel. It must be

taken into account the next characteristics:

 Time (together with the room temperature) is always displayed in the middle upper

section of the display.

 When setting the time, the display will send the new settings to the bus through its

own Communication Objects.