Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com
36
36
known at every moment the current working mode of the system (for achieving this, it will
be necessary to link with the same group address the mode objects of the climate system
and the object "Special Modes reception"). It is possible to include the sending/reception
of the special mode Protection, by parameter.
The mode sending is not carried out immediately. By the time the special mode changes,
it also does the centrol mode indicator.
 BOX 6 (1 bit control): When enabling this option, two 1-bit communication objects
appear: "1-bit sending" and "1-bit reception", which could be linked to the 1-bit objects in
charge of the control of functions of the climate system that allows a binary control (for
example, for controlling the Comfort prolongation of the thermostat).
3.3.3. PAGE TECHNICAL ALARMS
This is a specific screen, with up to six independent boxes in charge to monitor the bus
looking for possible warning conditions in the KNX installation (gas, smoke...). The Touch Panel
InZennio Z38i can be configured to warn the user in case of incidents inside or outside of the room
where the display is installed.
Figure 3.17. Technical alarms page
Every enabled box on the screen has some parameterizable fields:
 Name: This field allows associating a name with the corresponding box in the page.
(11 free characters are available to set the name).