Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com

mode (“1” for Heating or “0” for Cooling) will be sent to the climate system. Via the

object “Mode Reception”, the panel will receive the status of the current mode of the

climate system and will update the central indicator of the box with the corresponding

figure of the current working mode.

 For the Auto-Heat-Fry-Fan-Cool configuration: the 1-byte objects “[Clima x] Mode

Sending” and “[Clima x] Mode Reception”. Via the object “Mode Sending”, the value

of the current mode (“0” for Auto, “1” for Heating, “14” for Dry, “9” for Fan or “3” for

Cooling) will be sent to the climate system. Via the object “Mode Reception”, the

panel will receive the status of the current mode of the climate system and will update

the central indicator of the box with the corresponding figure of the current working

mode.

 BOX 4 (Fan speed): This is an Up/Down (1 bit) control, but its indicator may be three

different types:

 No indicator. The 1-bit object “[Clima x] Fan Sending” is enabled, in order to

send through it the order to increase/decrease the fan speed to the climate system

(“0” = Down, “1” = Up).

 Percentage indicator: Two new communication objects are available: “[Clima

x] Fan Sending”, 1-bit object to the to the climate system the orders of

raising/lowering the fan speed and the 1-byte object “[Clima x] Fan Reception”

through which the current fan speed percentage is received from the system with the

following ranges: 0%=Auto;1-33%=Min;34-66%=Med;67-100%=Max

 Integer indicator: The following communication objects appear: “[Clima x] Fan

Sending”, 1-bit object to the to the climate system the orders of raising/lowering the

fan speed and the 1-byte object “[Clima x] Fan Reception” through which the current

fan speed percentage is received from the system with the following ranges:

0=Auto;1=Min;2=Med;3=Max.

Note: The central indicator in the box varies its size depending on the value received;

thus, whenever the fan speed increases so does the central icon size (progressively)

and when the speed decreases, so does the icon size (see Annex II.

 BOX 5 (Special Modes): When enabling this box, it will be possible to switch from

one special climate mode to another: Comfort, Standby and Economic and it may be