Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com
25
25
 Icon: A pair of icons can be associated to the page box.
Binary indicator: This control enables a binary status indicator on the display box.
An icon, specifically enabled for this function, may be associated to the page box when a “0” is
received through the 1 bit Communication Object "[Home x; Box y] Binary indicator".
Same case if data received is a “1”.
 Action when value "0" is received: This box should be enabled when users need to
know when a “0” has been received through the specific Communication Object.
 Action when value "1" is received: This box should be enabled when users need to
know when a “1” has been received through the specific Communication Object.
 Icon: Different icons can be associated to both of the (ACTION) cases, so that users
can identify what is received through the specific Communication Object (a “0” or a “1”).
1 byte indicator: One byte provides much more information relating to an event than one
bit.
This indicator is normally used with percentages (%) relating to particular events (shutter
position, wind speed…), however another possible configuration option is a numerical range
among 0 and 255.