Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com

 Control type: to select the climate function to be controlled:

 Mode type: Cool-Heat or Auto-Heat-Dry-Fan-Cool

 Fan: the indicator type can be selected (no indicator, percentage or integer).

 Swing

 Icon: A pair of icons can be associated to the page box.

Note: Depending on the selected option, a communication object associated to the specific

box will appear in the ETS environment; the same object type corresponding the selected

option. This characteristic allows controlling also external climate systems.

1 byte control: This is a generic control to communicate all those devices susceptible to

be, by sending a single byte (value in the range 0 - 255) through the object "[Home x; Box y] 1

byte control".

 Type: Three possible options available in this case:

 Fixed value (one button, no indicator): By pressing the button on the display,

the same value will always be sent; the value selected in the field “Value”.

 Percentage (2 buttons with indicator): to send a percentage, according to the

type of press (Short press: raise or lower 1% with every short key press; Long press:

raise or lower 10% with every long key press).

Note: Take into account that value 0 corresponds with 0% and value 255 with 100%.

 Value 0-255 (2 buttons with indicator): to send a value between 0 and 255,

according to the type of press (Short press: raise or lower one single point in the

range with every short key press; Long press: raise or lower 10 points in the range

with every long key press).