Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com
15
15
Default password is 1234.
Figure 3.7. Password
In the field "Allow password changing", one can choose whether the password can be
modified in the panel itself or not. If this change is not allowed, the password cam only be
changed through ETS (parameters).
If the password changing is enabled, the following steps must be carried out to properly
change it (see also figure 3.8):
1.- Press NEW. In the upper part of the box the word “OLD” will appear and the old
password has to be written.
2.- After introducing it correctly, the word “NEW” will appear. That is the moment to
insert the new password.
3 - "REPEAT". Insert again the desired new password.
The left arrow button allows deleting/cancelling, in case of wrong-typing the digits.
Figure 3.8. Password changing from the panel