Operation Manual

ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com
11
11
Figure 3.2. Configuration screen by default
As it can be seen in the figure 3.2, the configuration screen has the following main windows:
General: to enable and configure the basic functionalities of the panel and the remote
control.
Pages: to enable and configure individually each available page: Home, Home 2 and
specific pages.
Inputs: to enable and configure individually each input of the controller.
Thermostats: to enable and configure individually each thermostat of the controller.
In the following sections, all the aforementioned windows are explained in detail.