Operation Manual

ZENNiOAVANCEYTECNOLOGÍA www.zennio.com

24
The Schedule programming is associated to the On/Off of the devices in
the KNX installation.
Every time a user enables a specific “Schedule Programming” page;
four free boxes with their respective Programming Channel
Communication Objects will become available to be enabled if
necessary.
NAME Æ
This field allow users to associate a name with the
corresponding box in the display, (11 free characters are available to set
the name).
LINKED TO CLIMAÆ
Once the Specific Page to be associated with
the Schedule Programming has been identified, the possible control
associations will be the following:
• On/Off
• Comfort (Only ON)
• Night (only ON)
• Stand-By (only ON)
LINKED TO SCENES? Æ
When this box is enabled, a user can
control Scenes by mean of a programming; the possible control
associations are:
• Only for ON
• Only for OFF
• For both ON & OFF
¾ Scene Number OFF:
Scene number to execute when the OFF
programming set by the user is fulfilled.
¾ Scene Number ON:
Scene number to execute when the ON
programming set by the user is fulfilled.
Note I: These associations are solved through internal links;
this means it is not necessary any kind of addressing process to
Buttonto:
‐Increasetimevalues
‐Flagweekdays
‐ Change the type of
response of the Channel:
ON
/
OFF
/
BOTH
Buttonto:

‐ Tomovetothe
nextitemtochange