Installation Guide

www.zennahome.com IS08895-I

Step 19

• Loosely attach the wall mounting brackets (H19) to the middle shelf (D) using the wall mounting

bracket screw (H20).

Step 20

• Place the assembly in the desired location and mark the location on wall through the holes in the wall

mounting brackets (H19).

• Drill holes in the marked spots on the wall. NOTE: If screws will not be going directly into studs, insert

wall anchors (H22).

• Complete mounting by tightening wall mounting screws (H21) into stud or wall anchors (H22).

• Insert adjustable shelves (M) in the desired locations, using the shelf clips (H18).

WARNING: BEFORE CUTTING OR DRILLING INTO ANY WALL SURFACE, VERIFY THE LOCATION OF ELECTRICAL,

PLUMBING AND GAS LINES. CUTTING ANY OF THESE MAY CAUSE SERIOUS INJURY.

 •Itisimperativethattheunitbefastenedtothewallforsafetyandstability.

 •Forsafetyreasons,itisimperativetouseastepladder.

x 1

x 2

H 1

H 19

x 2

H 20

RECOMMEND

x 1

x 2

H 1

H 21

x 2

H 22

H 20

H 19

H 21

H 22

x 16

H 18