Installation Guide

1-800-892-3986 IS19172-I2

Step 2 - Permanent Installation

• Align the top hole of the left mounting bracket (A) to the top wall anchor (D) that is now in the wall.

• Rotate a pencil through the bottom hole of the left support to mark drilling location. NOTE: MAKE SURE THE

CENTER DIVIDER IS PERFECTLY HORIZONTAL AND SCREW HOLES ARE POSITIONED VERTICALLY.

• Drill the bottom hole where marked. With your hammer, gently tap the wall anchor (D) into the hole all the

way so the edge is ush to the wall.

• Repeat on the other side with the right mounting bracket (B).