Instructions / Assembly

Pg 9 of 32

www.zennahome.com IS072D2-I

Permanent Mount

Step 6 - Installing the Rod Assembly in its final location.

• Secure the shower rod to the walls by twisting the end of the 7/8 in. diameter tube assemblies

(C)

away from you, until snug

•

Make sure rod is level and adjust as needed.

•

Mark locations on the wall through the mounting brackets (A) and (B) mounting holes, as shown.

• Remove the shower rod from the walls by twisting the end of the 7/8 in. diameter tube assemblies

(C)

towards you, until loose

mounting holes

twist the tube away from you until snug