Measurement Guide

To Hang Above Your Window:
If There Is Not Enough Space Between Window Opening And Wall:
To Adjust The Projection:
If Window Opening is 55in or Wider:
Using the included guide, mark the drilling
location for the two screws on each finial
bracket. Finial bracket A should be on your left
as you face the window. Secure finial brackets
with screws to wall using a drill.
Using a screwdriver, loosen the 2 screws on the
inside of the finial bracket (Do not remove screws).
Slide finial bracket to desired projection and
retighten screws fully. Repeat for other finial bracket.
1
2
3
4
5
6
7
1
2
3
4
5
6
7
Right
Corner
Left
Corner
InchesInches
Guide for making sure
brackets are level
When installing, if there is not enough space
between opening and wall, mount brackets above
window opening. Use the bottom of bracket
for alignment.
55 in (140 cm)
or wider
Center
Support
Installation Tips For Easy Install Drapery Rod
If your window opening is 55 in (140 cm) or
wider, it is recommended that the included
center rod support is used.
When installing the center support bracket, the
bottom edge of the center support bracket will
align with the top edge of the finial bracket.
before after
CENTER OF
WINDOW
EDGE OF
WINDOW