Measurement Guide

ManualsBrandsZenna Home ManualsCurtain RodsSmart Rods No Measuring Easy Install Adjustable Cafe Window Rod, 48 to 120 in., with Ball Finials in Black, 2-Pack Rods

Standard Installation:

Rotate

Tourner

Rotate

Tourner

1. Line up bracket A at top left side of molding. Screw

the bracket in the wall using a drill. Repeat with

bracket B on top right side of molding.

2. Make sure rod is unlocked (see directional

sticker). With window curtains on the rod, ﬁt the

thicker tube into the bracket A. Extend the rods

to the right to ﬁt the thinner tube into bracket B.

IF YOU NEED MORE LENGTH, unlock middle

tube as indicated on directional sticker and

extend.

(DO NOT EXTEND BEYOND THE YELLOW

‘STOP!’ LINE.)

Before Installation: Rotate bracket plate downwards until orientation matches the attached sticker.

Separate the plastic brackets from the rods.

3. While holding the thickest tube, twist the

middle tube away from you to lock it into

place (as indicated by directional sticker).

Twist until tight.

Installation Complete!

Space curtains until desired look is achieved.

Wood/MoldingDrywall

For drilling into

Drywall, pre-drill a

3/16 in. (0.47 cm)

hole and install

screws using the

included Plastic

Drywall Anchors.

Because of the position of the brackets relative to

the window, you will usually be screwing into a

wooden stud and will not need the plastic anchors.

Bracket

x 4-6 x 4-6

You will need: Components included:

drill pencil

anchors screws

Twist away

Hold

Bracket

Easy Install Cafe Rod Instructions

For safety, please use a step ladder.

To view an instructional video, visit:

http://maytex.com/easyinstall.php

Please Read All Installation Tips On Next Page Before Beginning.

If you want to hang the rod at a different height,

see the next page.

Twist and pull to remove left bracket. Repeat on the other side.

Bracket