Operating instructions

Operation
- Cheo_ preset [abels for your channels.
- If a channel label is provided on the signal from the broadcasting station, the TV displays a short n_e for a channel -
even if you didn't preset a label for the channel.
1. Press the MENU button and then use ,i, JV button to select the _JP menu.
2. Press the I_ button and then use & _y button to selec_ Cl-_ L4zbe].
3. Pre_ the I_ button. You will now see a screen filled with Labels and a preview screen.
4. Use the OH Az_ button to sele_ a channel to Label.
5, U_ A / V t41 t i_ button to select the appropriate label for the channel then press ENTER button to set the Label to
the selected channel
- if you press ENTER button in TV viewing mode, you will see the channel banner. • For example:
Change the picture source so you can watch your TV, _ble T,J, VCR, DVD, or any other devices that are connected to your TV.
1. Press the MENU b_,_tton and then use A _V button to select the _f_P menu.
2. Press the I_ button and then use A/V button to select _put Source.
3. Press the I_ button and then use A t V button to setect the source'. Antenna_
Cable _deo, Front Videe_ Componentl_ Com_nent2, RGB-DTV (or RGB-PC),
HDMJiDW,
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Note:
• To toggle RGB-DTV and RGB-PC, select RGB-DTV(or RGB-PC) and press ID.
button.
Sets a Jabel to each input source or lets you skip the input source which is not
in use when you press TV/VlIDEO button.
1_ Press the MENU button and then use A / V button to select the S_'Ff_ menu.
2. Press the i_ button and then use A _1, button to select _t _tbel.
3. Press the I_ button and then use & fV button to select the _urce: Vi_o Front
Video, Component1, Component2, RGB, HDMIiDW.
4. Press the _1 / I_ button to select the tabeL
5, Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Operating Guide 25