installation and Operating Model Numbers Guide I Warranty I Z42PX1D!ZSOPX2B ] PLASMATV o ze i zenith (s:,_::)pyd)ht 205, L,O E:ectionics USA I:_(:,
Warning/Caution f WARNING/CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) SERVICEABLE PARTS INSIDE.
Safety Instructions R In ons f IMPORTANT Important SAFETY safety INSTRUCTIONS instructions shall be provided sheet, or be located tus, This information with each apparatus, This informal]on shall be given in a separate booklet or before _y operating instructions in an instruction for installation for use and supplied with the apparashall be given in a language acceptable to the country when the apparatus is intended to be used, The important safety instructions shatl be entitled "important S
Safety Instructions ! IOnS F 13, Unplug 14. Refer this apparatus all servicing in any during lightning to qualified service way, such as power-supply the apparatus, the apparatus storms or when personnel. unused Servicing is required cord or plug is damaged, has exposed for long liquid to rain or moisture, periods of time. when the apparatus has been spilled does not operate has _n or objects normally, have or has _en damaged fallen into dropped. 15.
Contents Warning/Caution Safety Instructions ................................ ............................. 2 3~4 Manual Sound Front Surround TV Speakers On/Off Setup BBE ................................. Introduction Controls 7 Connection Options ............. Remote Control Key Functions 9-10 Installation Accessories Installation ......................... instructions .................. Manual Clock Setup On/Off Timer Setup 11 11 ~12 _ning _ TV _y to Me _.<_lto protect the set tun_ng .......
Introduction What is a Plasma Display Panel (PDP)? A plasma display panel is the latest display technology and the best way to achieve flat panef displays with excellent image quality and large screen sizes that are easily viewabie The PDP can be thought of as a descendant of the neon lamp and it can be also be viewed as a series of fluorescent lamps, How does it work? PDP is an array of ceils, known as pixels, which are comprised of 3 sub pi×els, corresponding to the coiors red green, and blue_ Gas in
Introduction This is a simpFified representation of front pane]. Here shown may be somewhat different from your TV.
Introduction Back Connection Panel S-VIDEO Input VI DEC Input Connects the video signal video device, from a AUDIO Input Use to connect to hear stereo sound from an external _vice, RS-2320 INPUT (CON" TROL_ERVICE) PORT Connect to the RS232C port on a PC. Audio/Video |nput Conn_ audio/video output from an external device to Monitor Output Connect a second TV or S-Vid_ Input Connect S-Video out from an S-VIDEO devi_ to the SVIDEO these jacks. DVD/DTV Input (O-m_ent 1.
introduction = When using the remote control, aim it at the remote control sensor on the TV. TV • Rotates the input mode between Antenna _d Cable. External input modes rotate in regular sequence: Antenna_ CaMe, Video, Front Selects the remote operating mode: TV, DVD, VCR, AUDIO CABLE or ST8, _Iect a mode other than TV, for the rem,3te to operate an external sources are linked automatica[ly_ these are connected ) only ff device, Brings up the main menu to the screen.
Introduction z z z z z z z z z z z z z z z z z z z z z_ VCRiDVD BUTTONS Controi some video Turns your TV or any other programmed equipment on or off, depending on mode, Shows program _UMBS_C'K Mows you to navigate the on-screen menus and adjust the system settings to your preference.
Installation Ensure that the following when you purcha_d Operating accessories are included with your plasma display. If an accessory is mi_ing, please centact the dealer the product. Guide Batteries Power Cord 75_.
Instatlation • The TV can be in_alted in various • The TV is designed to be mounted ways such as on a wall hodzontaiJy, or on a desktop etc.
Installation 1, Analog and Digital TV signals - Watl Antenna _ket or Outd_r provided on; antenna Antenna wi_out a Cable Box Connections Fop optimum picture quaJity, adjust antenna direction if needed.
Installation 3, Analog and Digital TV signals provided on cable and antenna f Bronze Wire RF Co_ial Wire (75 ohm) RF Coaxial Wire (75 ohm) CabFe TV Wall Jack Turn clockw_e to tighten, Bronze Wire ,i - To improve the picture pEease purchase • If the antenna needs to _ Way Signa_ Spritter" °ff quaJity in a p_r a signal amplifier signal area, and install pro_r[y. split for two TV's, ins_all a "2- in the connections. the antenna is not installed et for assistance.
Installation How to connect Connect the audio and video cables from the externa] equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the _ack colors (Video = yellow, Audio Left = white, and Audio Right = red). How to use 1. Select the input source with using the TVFVIDEO button the remote control.
Installation - This TV can receive Digital Over4he-aidC_le sign,s without an external digital set4op box. However, if you _ receive signals from a digffa_ set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwi_h Digital Contents Protection) protocol for Digital Contents (480p,720p, i080i).
Installation This TV provk:_es P_ug and Play capability; meaning that the PC adjusts automatically to the TV's settings = The TV perceives 640x480 60Hz as DTV 480p based on the PC graphic card, change the screen scanning card accordingly rate for the graphic How to connect 1.
installation Monitor Display Specifications Horizontal Frequenccy(KHz) Resolution 640x480 800x600 (HDMIIDVI Mode) Vertical Frequency(Hz) 31,469 5&94 37,861 72,80 37._0 75.00 35,156 56.25 37.879 60.31 48.077 72.18 46,875 75,00 Resolution 1024x768 Hotlzon_l Fteguency(KHz) Vertical Frequency(Hz) 4&363 60,00 56,476 70_06 60023 7&02 The TV has a special signa_ output hook up a second TV or monitor.
Installation HIGN _%Nrl-_ON MULTIMF=D_ INTE2RFNDE - HDMV", the HDMm logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDM_ Licensing." This TV can receive the High-Definition Multimedia _nterface(HDMI) or the Digi_l Visual lnterface(DVl). - This TV supports HDCP(Nigh bandwidth Digital Contents Protection) Protocol for 72Ox480p, 128Ox720p, and 192Ox1080i resolution.
Installation Cable sample f (not supplied with the product) HDMI Cable HDMI to DVl Cable (not supplied with the product) Fiber Optic Digital Audio (not supplied Cable with the product) Analog Audio Cable(RCA type) (not supplied with the product) Analog Audio Cable(Stereo (not supplied to RCA type) with the product) ,,J 20 Plasma TV
Installation How 1. 2. 3. 4. to use Connect the HDMItDV_ Source Devices(DVD Player or Set Top 8ox or PC) and the TV SET. Turn on the display by precsing the POWER bL_on on the TV SET and HDML/DVl Source Devices remote control. _t_ HDMI/DVl hput source in input source option of SETUP menu.(Refer to P.25) Che_ the image on your TV SET. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDM}/DVi Source Devices.
Operation * in this manual, the OSD (On Screen Display) example to help you with the TV operation, First, connect 2. power cord correctly At this moment, tn _andby mode to turn TV on, press the 0/I, TM INPUT, TVNIDEO, Select the viewing When finished OH (& source This TV is programmed 3.
Operation Autorr_3ticaliy finds all available channels through antenna or cable inputs, and stores them - Run EZ Scan again after my Antenna/Cable connection changes. - A password is required to gain access to EZ Scan menu ff the L_k System is turned on. 1 Press the MENU button 2. Press the I_ button and then use & _V and then use A IY button to select button to select is required 1 Press the MENU to gain access button and then to ManuaJ Scan use & !V _S,'_ and then use 4, IV button 3.
Operation - There are two different ways in order to add or delete scanned channels. One is °Custom List" _d the other is °Favorite List _ in the channel list. Both of them are available after _ on the _UJP menu. A Custom List can be created by toggling each channel on or off with ENTER button The channels in the Custom List are displayed in bfack color, and the channets deleted from the Custom List are displayed in gray color.
Operation - Cheo_ preset [abels for your channels. If a channel label is provided on the signal from the broadcasting even if you didn't preset a label for the channel. 1. Press the MENU button and then use ,i, JV button 2. Press the I_ button and then 3. Pre_ You will now see a screen the I_ button. 4. Use the OH Az_ button - if you press Change ENTER a channel to select button 1. Press the MENU b_,_tton and then mode, use A _V and then use A/V a short n_e for a channel - menu.
OF,;_ratien EZ Picture adjusts the TV for the best picture appearance, program category: o When ad)usting Vi_o menu options (contrast, bdghthess, Picture automatically changes to Custom. - D_lght_ No_al, Night T_, Movie_ Video Game the factor/and are not adjustable. Select color the preset sharpness_ and Spor_ value in the EZ Picture menu based on the tint, and color temperature) settings are preset for optimum manually, picture qua_iby at 1.
Operation Other ranguages casting station. may be available 1, Press the MENU bb_ton and then 2_ Press the I_ button 3, Press the lip button French. 4. Press EXIT button previous menu. - ff a digP_J signal use & / V and then use A tY and then bt_ton is provi_d to seiect button to select use & _ V button to return to TV viewing by the broad- the AUDIO Audio to setect: or press MENU menu_ language.
Operation $R$(0) is a trademark TruSurround of SRS Labs, XT technology Manufac_red under license 1, Press the MENU from and then 3. Press the I_ button and then or SRS (Sound - 31) Ec._oSound under _icense from SRS Labs, Do_by Laboratories, button and then use A/V 2. Press the I_ button System inc.
Operation BBE High Definition Sound restores inteBigibility _d music realism. 1. Press the MENU button _d cladty and presence then use A/V button for better to select the &tfl_[O 2. Press the I1_ button and then use A/V button to select E_E. 3. Press the _ and then use & / V button to select On or Off. button 4. Press EXIT button to return to TV viewing the previous menu. • _ •Trebie, Manufactured un_r Bass or BBE aren't license suitable from or press MENU BBE Sound, for SP,.
OF;_rafion The time is set automatically from a digitaJ channe_ signal, The digital channel signa] includes information for the current time provided by the broadcasting Set the ctack _nuai_y, if the current time is set incorrectly by the auto clock function. 1. Press the MENU button _d then use &/_' button to select 2. Press the I_ button and then use A/V button to setect Aulo 3, Pre_ and then use A/V button to so}oct _or_. 4 the I_ button the TD_I[E menu. Clock.
Operation - The _eep T_mer turns the TV off at the preset ti_, Note that this setting is cleared You can also set up the Sleep Timer in the TIME menu. when the TV L_turned off, 1 Press the _MER b_ton repeatedly to sel_ the number of minutes. When the O_ option appears on the screen, highlight one of the for[owing sleep timer options by using the navigation : 10, 20_ 30 60, 90, 120, 180, and 240 minutes. 2.
Ot;_eration 0- Lets you choose the way an anatog picture with a 4:3 aspect ratio is displayed on your TV wffh a 16:9 ratio picture format. When you receive an analog picture with a 4;3 aspect ratio on your 16:9 TV_ you need to specify how the picture is to be displayed, o If you are viewing a picture with a 16:9 aspect ratio, you _n't use the Hodzon - Hodzon aspect ratio is not avaBabJe for Component 1-2(480p/720p/1080i)IRGB-DTV - aspect ratio option.
Operation 1. Press the MENU menu, button 2. Press the I_ button _d and then use A /V button to select the OPTION then use A _V button to select CapUon. 3, Press the I_ button and then use A / V button to select _or 4. Press EXIT button to return the previous menu. to Tv' viewing or press _, MENU button to return to Analog Broadcasting System Captions - _lect - Analog caption displays information at any position on the screen.
Operation / - Customize the DTV/CADTV 1. Press the MENU menu. button captions that appear and then use a./V on your scr_n button to select the OP_ON 2. Press the I_ button and then use a, /V button to select C4_ _n. 3 Press the I_ button and then use 4 / I_ button to se]est C*_ 4_ Use & iV button to customize the Style Font etc, to your preference. A p_ view icon is provided at the bottom of the screen, use it to see the caption language.
Operation - Low _wer reduces 1 Press the MENU menLL the plasma button dispFay power and then use A t V consumption, button to select the OP_ON 2. Press the I_ button and then use _, _V button to seJect Low Power. 3. Press the I_ button and then use A iV to _Ject When you select On, 4, Press EXIT button the previous _nu, the screen to return button On or Off.
Ot:_ration Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station, Re default setting is to aJlow alt programs to be viewed_ Viewing can be biocked by choosing the type of the program and the categories, It is also possible to b_ock aH program viewing for a time period.
Operation Set up blocking schemes to block specific channels, A password is required to gain access to this menu. 1. Press the MENU Then, button and then use A _V button ratincss, and external to select the tr-o_ viewing sources. menu. press the i_ button ° The TV is set up with the initial password "0©o0-0 '', 2_ Use Me & / Y button to choose from the following Lock Menu options. Once the option is selected_ change the settings to your preference, • Leek System; ously.
Operation EPG (Electronic Program Guide) (in DTV mode) This The This The This system has an E_ectronic EPG supplies information function can be used only EPG displays the program function is only supported 1. Press he GUIDE button Program Guide (EPG) to help your navigate hrough alt the possible viewing such as program listings_ start and end times for aii available service& _en the EPG information is broadcasted by broadcasting companies. description for next 7 days. in DTV n_de.
Operation Brief Info. Brief Into shows the present screen [rfformation. - Press the INFO bb_an to show the Brief Into on the screen. - INFO button does not work in Component1, Component2, o Press the INFO button or EXIT button to exit. Operation: RGB, and HDMI/DVI rrc_des. • Watching TViDTV!CATV/CADTV • Watching Video, Front Video ° In Component1, Component2, RGB, HDM[/DVl modes, INFO button is not working. Fun_on: * Show the present screen information. .
Operation Mute - When you repeatedly M_e pr_ess the MUTE : Sound button 2. To return to normal viewing, 40 Plasma 7q/ the sound mo_ is muted. - Freezes the currently-viewed 1. Press the FREEZE button, in turn. (Refer Mute picture, to freeze is changed the screen press the FREEZE sec_on. button again. to the picture Off : Sound _low) is enabled.
Operation Screen Setup for PC mode • When RGB connect to PC input and select the RGB-PC, this function • When HDMWDVt connect to PC input and select HDMI/DV_ • In RGB-DTV mode, SiZE and PHASE is not avaitable_ • After connecting RGB-PC or HDMI/DW Display PC Adjust - Position Adiust the screen position. - Size Adju_ the screen size. Phase Adiust the phase of Pixe_ dock.
Extema! Control Device Setup External Control Device Setup Connect the RSo232C input lack to an extema_ contro_ device (such as a computer or an A/V control and contro_ the Monitor*s functions externat[y_ Connect the sedat port of the control device to the RS-232C jack on the Monitor back panel. RS-232C connection cables are not supplied w_h the Monitor, system) PC No.
External Control Device Setup Use this function to specify a monitor IO number. Refer to 'Real Data Mapping', See page 44, 1_ Press the MENU button 2, Press the I_ button 3. Press the i_ button desired monitor and then use A iV b_on and then use & j V b_on and then _D number. 4. Press EXIT boron previous menu.
External Control Device Setup 01. Power (Command2:a) 05. Volume • • To control Power On/Off of the Monitor. Data ][Set In][ ][Data][Cr] ] 0 : Power Off ][Set In][ ][OK][Data][x] [[k][e][ ][Set In][ Data 0 : Volume 1 : Volume ] • (Main Picture Input) Transmission I[k][b][ Data ][Set In][ 0: 1: 2: 3: ][Data][Cr] DTV Analog Video Front Video 4: Component Component RGB-DTV RGB-PC HDMI/DVl ][Set In][ ][Set In][ ][OK][Data][x] To adjust volume.
External 09. • (Command2:i) Color 13. To adjust the screen color. You can also adjust color in the Video menu. • Transmission Ig][ ][Data][Cr] Min:0~Max:64 ] • Refer to 'Real data mapping'. Acknowledqement [[i][ ][Set ID][ Control Lock ][OK][Data][x] [[k][m][ ][Set ID][ ][Data][Cr] Data 0: Lock off See page 44. l[m][ ] ][Set ID][ 14. Treble (Command2:r) To adjust the screen tint. You can also adjust tint in the Video menu.
External Control Device Setup 17. Color • Temperature (Command2 :u) To adjust color temperature. You can also adjust color temperature menu. 21. • in the Video Pixel Setting (Command2:s) pixel number in orbiter function.
External Control Device Setup * All data are transmitted *Two/One part Channel: by Hexadecimal 6th bit code 25. Input select(Command: This bit is used in a cable-ready system. *Using physical channel: 5th bit If the channel band is NTSC air or NTSC cable, channel tun- ing can be done by only physical channel. In this case, using physical channel bit must be low(0). But if the channel band is ATSC air or ATSC cable, there are two cases that physical channel enable or disable.
IRCodes I_ Connect outp_ your w_red remote control to the Remote Control port on the TV waveform Single pulse, rr_u]ated with 37,917KHz signal at 455KHz To Carrier __J_[__[--l__ frequency FcAn = 1MC = fosc!12 I_ i _,-- i T1 Duty _tio = T 1,qFc= I/3 Configuration of frame * 1st frar_ eLead Low High ICOIC 1 I02103 ,mRe_at I04105106107 Data IO01C 1102103 Ic41calc61c7 Ir'_lDi ID2tD3 code I_IDSIDelD7 _l_l_f_l_l_l_t flame L_ __J F Tf ............................................
IR Codes Code (Hexa) Fun_ion 0B OF 08 , TVNIDEO _ TV INPUT . POWER C4 POWER Note _ RIC Button _ PJC Button . R/C Button (Po_,_er OrdOff) Discrete JR C_e {Qn!v £ovee[ On) ON C5 79 0E i0 ~ i9 POWER RATIO . TIMER Number OFF Discrete tR Code (Only R/C Button 4C 1A 09 02 03 00 01 i E AA - (Dash) FLASHBK MUTE . VOL A VOLT CH a CH T FAV INFO . R/C RiC RtC R/C R/C R/C 39 40 41 _ CC a _' .
Programm#_g theRemote Programming 1_ The remote is a mufti-brand other manufacturers Note that the remote the Remote or a universal may not control 1. To find out whether your remote remote. aH modets can operate It can be programmed the device without is turned grammed. to operate 2.
Programming Brand Codes Brand Codes &iWA 034 K_:!NWO00 014 034 _KAi 016 125 047 048 &MPRO 072 001 101 012 10_ _HAM 03! 033 103 _.
Programm#_g Codes Br_ Cedes B4t_ ALPNAS_IARDSR AMPUCA BiRDViEW CNANNEL MASTER 123 133 134 GENER_£I_$_TR_7_E_ 003 @84 031 058 I'oti'fAC HI 139 140 CHAPARRAL CtTOH CUR_S MATHES >RAKE O_ 05! 013. 126 014 056 055 129 015 008 00_ 09_ 050 145 005 @_ 007 010 011 052 112 116 018 037 012 077 141 DX ANTENNA ECHOS tAR Cedes 02_ _60_ 0560qO 057 076 058 093 094 095 096 097 0_ 099 100 HUGHFS JANI_L JERROLD KATHREIN L.
Troubleshooting Troubleshooting Checklist Check to see ff there causing The remote controJ , . Correct is any obiect installed w_th correct remote opetafJng new b,_tedes, . Color in the Video to p.26) any function (If stJtl picture [_ the from 'SP_ke_ polarity (+ to +, to -)? mode set: TV, VCR etc.? (Refer to p,9) menu and press to restore is on the screen Check for local interference output contro_ the 1_ button. ,_p aoo,_c_oot a_stanco _tv_oo,_e TV_o_ theVCR.
Maintenance intenance Eady maffunc_ons can be prevented. Care_[ and r_ular cleaning can extend the amount of time you will have your new TV, Be sure to turn the power off _d unpUag the power cord befo_ you begin any cleaning_ 1. Here's a great way to keep the dust off your screen for a while. Wet a soft c_eth in a mixture of lukewarm w_er and a littUe fabric softener or dish washing detergent. Wring the cloth until it's a_most dry, and then use {t to wipe the screen. 2.
Specificatien pecifications Width (inches / mm) Height (inches /mm) Depth (inches / mm) Weight (pounds / kg) 47.6 / 1210 55 / 1400 27,6 / 701 32.3 / 821 11.6 / 295 12.4 / 315 79 / 3&g 115,7 / 52_46 852 x 480 (Dot) Resolution 1_6 AC100°240V Power requirement NTSC*M, Tetevisien System Program VHF2 Coverage ATSC, Operating • Humidity 64 & 256 QAM -.69, CADTV 1 - 135 75 _.
Zenith under will repair or replace your product, at Zenith's option, if it proves to be defective in material or workmanship normal use, during the warranty period ("Warranty Period") listed below, effective from the date of original consumer/end effective only user when WARRANTY LABOR: only PERIOD: ONE PARTS: purchase. This warranty is good used in the United States. YEAR ONE HOW from YEAR the from the Date Date date.
BEFORE CALLING FOR SERVICE: • Please check your operating guide - you • Please have your product model number, lation available. • If a replacement Zenith against you return the unit • If a replacement unit to Zenith. • Parts is required, a credit defective unit and service under card number unit within is received, in accordance charge. Other service tory warranty service, may avoid a service call.
