Specifications

.€
Remote Control
Control Keys on the Zenith MBR3429
Multi-Brand Remote Control
go-
OOO
iI, +
Your Zenith MBR3429 remote control operates
your VCR by means of an Infra-Red (IR) Signal.
It must be aimed at the VCR to function. While
controlling the VCR, the VCR LED (Light Emit-
ting Diode) will light each time a key is pressed.
Operate Other Brand of TVs and Cable Boxes
with the MBR3429Remote
This remote can be taugl_t to operate other Infra-
Red (IR) controlled TVs and Cable Boxes.
Switching between "IV, VCR and CABLE with
the remote control, will allow you to operate each
unit individually. Some oi[ the advanced features
on your TV cannot be accessed with the
MBR3429. Use the remote control provided with
YOUrTV for these advanced features. See the
multi-brand codes listed on page 3-3.
1. CABLE --. Will light momentarily when mode
is switched to operate cable box or when you
press a key on the remote while in the Cable
mode.
2. TV - Will light momentarily when. mode is
switched to operate TV or when you press a key
on the remote while in the TV mode.
3. VCR - Will light momentarily when mode is
switched to operate VCR or when you press a key
on the remote while in the VCR mode.
4. MODE - Press to switch control between TV,
VCR and CABLE.
5. OFF/ON - Turns VCF:, TV or cable box off or
on when in that particu]tar mode.
6. MENU - Press (while in VCR mode.) to place the
VCR Main Menu (VCR Features) on the TV screen.
7. SOURCE - A function key for your TV, refer
to TV operating guide.
8. FLASHBK - When playing a tape, press to
change image on TV screen to program being
received by VCR tuner.
9. QUIT -- Press to exit main menus or to access
Closed Captions available on some Zenith TVs.
10. CHANNEL -- Press Up arrow to l;o to next
higher channel, press Down arrow to go to next
lower channel.
11. VOLUME -- For Zenith TVs press Up arrow
to increase volume level, press Down arrow to
decrease volume.
2,613-0 3 - 1