Specifications

VCR Plus Setup
VCR Plus Setup Introduction
"]?heVCR Plus setup is as simple as pressing the
CH MAP key on the remote control and follow-
i:ag the on-screen instructions. However, you
raust perform the preliminary setup and be
prepared to answer or perform the on-screen in-
structions.
Preliminary Setup
Certain VCR options must be selected to allow
the VCR Plus Setup procedure to be performed.
1. The cable/converter box and the location
of the VCR are critical to VCR Plus record-
ing. The VCR has a window through which
the codes are sent to the cable box. This
signal is sent out by the VCR and reflected
off most surfaces in such as way that the
cable box wiI1 receive the signal from many
different angles; the signal will literally fill
the room. For the cable box to receive this
signal, the positions of the VCR and the
cable box are important. No obstructions
should be in the path of the receiving win-
dow on the cable box, or in the path of the
sending window on the VCR. In other
words, do not place any objects in the sig-
nal path of the VCR or cable box, such as
coffee cups, ashtrays, books, etc.(See il-
lustration below.) Note that the cable/con-
verter box is located on the top and at the
front of the VCR. Note that the signal sent
out by the VCR is _,eing reflected off the
reflective surface or wall and bounced back
to the cable/converter box signal receiving
window. Note that the cable box has tuned
to Channel 59.
2. The source select option must be set to
Tuner. Press Menu, choose 4-Tuning Fea-
tures. Press 4-Sourc,_ Select. Press ADJ to
place the arrow next to Tuner. Press QUIT.
3. The Tuning Band selected must be CATV.
Press MENU on the remote control.
Choose 4-Tuning Features. Choose 1-
Tuning Band. Press ADJ to place the arrow
next to CATV. Press QUIT.
=
Sa
TheVCR's clock date and time must be set
correctly. Press MI'NU, choose 1-Clock
Set, follow the on-screen instructions.
Press QUIT when done.
The VCR, cable/converter box and TV set
must be turned oa. The TV must be set to
Channel 3; set CH 3-4 switch on the back of
the VCR to 3. Note: If you chose to set the
VCR and Cable Box Location/Relationship
Cable Box and Signal Receiver
VCR and Signal Sender Window
Wall or _ny Other Reflective Surface
Cable
Box
VCR
261.O
11 -1