Installation Instructions

Pg 3 of 6 [phone] IS1360
CABINET MOUNTING
INSTRUCTIONS:
WARNING: Before cutting or drilling into any wall, make certain of the locations of electrical, plumbing
and gas lines. Cutting any of these lines may cause serious injury. If needed, contact your electrician,
plumber or service person.
IMPORTANT: Be sure to select the proper mounting hardware (not included) to support the cabinet,
whether mounting to drywall or to wooden studs.
1. Hold the cabinet body (A) up against the wall in desired final location. NOTE: Make sure cabinet
is level.
2. Mark the screw locations through the holes in the back of cabinet See Fig. 1. (We recommend
mounting the cabinet directly into studs.)
3. Drill marked spots on wall. If screws will not be going directly into studs, insert wall anchors (not included).
4. Attach cabinet body (A) to wall, using appropriate mounting hardware (not included).
5. Fasten hinges (1) to doors (B,C,D) with hinge screws (2). See Fig. 2.
6. Fasten doors (B,C,D) to cabinet body (A). See Fig. 3.
7.
Apply bumpers (3) to back of the doors.
8. For hinge installation or adjustment instructions, please refer to page 6.
Fig. 3
Fig. 2
2
1
Fig 1
A