Manual

,, CONNECTIONS FOR YOUR TV
STEP 1. MAKE BASIC CONNECTIONS TO TV (CONTINUED)
C. Cable-TV Connection to TV
If You Do Not Have a Converter/Decoder Box:
1. Connect the 75-ohm cable-TV input directly to
the ANT/CABLE 1 jack.
If You Have a Converter/Decoder Box: I
I
1. Connect the 75-ohm cable-TV input to the •
ANT/CABLE 2 jack on the TV.
2. Connect a 75-ohm cable from the LOOP OUT
jack on the TV to the IN jack on the decoder/
converter.
3. Connect a 75-ohm cable from the OUT jack on
the decoder/converter to the ANT/CABLE 1
jack on the TV.
I
I
I
F--o
!
!
IN
CABLE-I'Ve---
CH 314
OUTPUT
DECODER/ t___
CONVERTER
I
I
T
I
I
I
I
I
LOOP OUT ANTI,CABLE 2 ANTK,ABLF I
TO DECODER
D. Cable-TV Connection to VCR and TV
If You Do Not Have a Converter/Decoder Box:
1. Connect the 75-ohm cable-TV input directly to
the ANT/CABLE 2 jack.
2. Connect a 75-ohm cable from the LOOP OUT
jack on the TV to the antenna IN jack on the
VCR.
3. Connect a 75-ohm cable from the antenna OUT
jack on the VCR to the ANT/CABLE 1jack on
the TV.
If You Have a Converter/Decoder Box:
1. Connect the 75-ohm cable-TV input directly to
the ANT/CABLE 2 jack.
2a. Connect a 75-ohm cable from the LOOP OUT
jack on the TV to the IN jack on the decoder/
converter.
2b. Connect a 75-ohm cable from the OUT jack on
the decoder/converter to the antenna IN jack
on the VCR.
3. Connect a 75-ohm cable from the antenna OUT
jack on the VCR to the ANT/CABLE 1 jack on
the TV.
IF NO CONVERTER/DEC;ODER
C_t3/4
OUTPUT
DECODER/ ["e'/
CONVERTER
LOOP OUT ANT/CABLE 2
TO DECODER
AN'FICABLE 1
NOTE:
If you have a stereo VCR, you must make the A/V
connections described in Step 2 for you to hear stereo
sound while playing a tape.
_s_o 1 - 3