Manual

AUDIO MENU
AUDIO MENU
* BASS - I +
TREBLE - I +
BALANCE L I R
AUDIO STEREO
SEQ ON
SURROUND Bm
NULL - I ÷
NOTE: All adjustments on the
AUDI(3 MENU are optional. You
do not have to use these features in
order to use your TV.
GENERAL INFORMATION
Your TV is equipped to receive Multi-channel Television
Sound (MTS) when available in your area. It can also
receive a Second Audio Program (SAP), that is, a program
broadcast with two attdio portions (two languages). The fol-
lowing modes of operation are available.
STEREO
Directs the sound to the left and right speakers as supplied
by the program source (broadcast TV station, VCR, etc.)
MONO (Monaural)
Directs the same sound to both left and right speakers even
if the source being received is in stereo.
2ND AUDIO/SAP (Second Audio Program)
Directs the sound for the (SAP) Second Audio Program
(typically a second language) to both the left and right
speakers. SAP sound is always monaural.
Dolby Surround Sound
Dolby Surround Sound gives the effect of surrounding you
in sound while listening to your TV. Optional surround
speakers are connected to the TV's rear connection panel
as shown on page 1-7.
Surround Sound is "hidden" in the left and right channels
of a stereo signal. Therefore, raonaural broadcasts and
tapes of monaural programs can not provide Surround
Sound. However, many video tapes, laser discs, premium
cable channels and MTS stereo television,; broadcasts fea-
ture Dolby Surround encoding. Look for the following logo
to identify these.
NOTE: Dolby Surround Sound can be enabled only if
stereo has been previously sek:cted by using the AUDIO op-
tion and the signal being received is stereophonic.
Automatic Mode Selection
We recommend that you use tire STEREO option. The TV
will switch automatically between the STEREO and
MONO modes dependent on the signal being received.
If you prefer SAP, use the 2ND AUDIO/SAP option. On
those stations which broadcast: two audio portions, you will
hear the SAP (usually a seconcl language). When the SAP
broadcast ends, the TV switches automatically between
STEREO and MONO modes. The TV switches back to
2ND AUDIO when the SAP broadcast resumes.
BASS-
Use ADJUST (ADJ) Left/Right to adjust the amount of
BASS (low-frequency level) in the sound. To decrease (-)
BASS, press ADJUST (ADJ) Left. To increase (+) BASS,
press ADJUST (ADJ) Right.
TREBLE
Use ADJUST (ADJ) LeftfRight to adjust the amount of
TREBLE (high-frequency level) in the sound. To decrease
(-) TREBLE, press ADJUST (ADJ) Left. To increase
( + ) TREBLE, press ADJUST (ADJ) Right.
BALANCE
Use ADJUST (ADJ) Left/Ril;ht to shift the BALANCE of
sound between the left and right speakers as indicated by
the on-screen display. To increase the relative sound level
in the Left (L) speaker, press ADJUST (ADJ) Left. To in-
crease the relative sound level in the Right (R) speaker,
press ADJUST (ADJ) Right.
2ro_ 10 - 1