Manual

SETUP MENU
CLOCK SET
Purpose
Sets the clock in the TV to the correct time. After the time
is set, the current time will appear on the Channel!Time dis-
play whenever the TV is turned on, the channel is changed,
or ENTER is pressed.
Power Failure Note: The time will have to be reset if power
to the TV is interrupted.
SI-TUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
PROJO SETUP
10:30
Selecting Clock Set
To Use CLOCK SET from Remote Control
1. CLOCK SET should be selected if you followed the
"Basic Menu Operation" given in the "On-Screen
Menu" section.
2. Use the numbered buttons on the remote control to
enter the current time. Press ENTER to start the
clock.
For example, to set the clock to 10:30, press 1, then
0, then 3, then 0; and then press ENTER. If you
enter an invalid time, such as 14:35 or 2:8(I, the time
will disappear and you can enter another time.
To Use CLOCK SET from Control Panel
1. Use SELECT Up/Down to highlight CLOCK SET
in the SETUP MENU.
2. Use ADJ Left/Right to set the time, and then press
ENTER to start the clock.
CAPTIONS
F_urpose
Displays closed captions (CC) or informational text when
available on the selected channel.
1'o Access CAPTIONS Indirectly
1. CAPTIONS should be selected if you followed the
"Basic Menu Operation" given in the "On-Screen
Menu" section.
2. One of five different selections is shown: OFF,
CAPTION 1, CAPTION 2, TEXT 1, and TEXT 2.
3;. Press ADJUST (ADJ) Left/Right to select desired
mode of operation.
4. The display disappears from the screen automat-
ically in about 10 seconds, or you may press ENTER
(ENT) to remove the display immediately.
SETUP MENU
AUTOCH. SEARCH
CH.ADD/DEL
CH.LABELS
TUNINGBAND
AUTOFINETUNE
CLOCKSET
_- CAPTIONS
CH. BACKGROUND
PROJOSETUP
Selecting Captions
CAPTION 1
To Access CAPTIONS Directly
1. Press CC-QUIT on the remote control to select
CAPTIONS. One of the five different selections is
shown: OFF, CAPTION 1. CAPTION 2, TEXT 1,
and TEXT 2.
2. Press ADJUST (ADJ) Left/Right to select the
desired status.
3. The display disappears from the screen automat-
ically in about 10 seconds, or you may press ENTER
(ENT) to remove the display immediately.
Application
Your new TV is able to decode and display tlhe Closed cap-
tions and informational text that are broadcast with some
TV shows. Captions can be subtitles for the hearing im-
paired, or translations into another language. Informational
text can be the daily program schedule for the TV station,
or special announcements.
Look for a (CC) or similar sign in your TV schedule, or on
the video tape: cassette, which indicates that captions are
provided.
The closed caption signal is recorded by all VCRs when
recording a TV broadcast or copying a tape having closed
captions.
(continued on next page)
_so_o 9 - 4