Manual

SETUP MENU
TUNING BAND
Purpose
Allows for setting the TV tuner to match your antenna or
cable-TV system.
If you used the AUTO CH. SEARCH feature, the proper
BAND was set automatically for your TV. If you did not use
AUTO CH. SEARCH, or you are having difficulty tuning
channels, the TUNING BAND may have to be set manually
to match your viewing needs.
Before Using TUNII_G BAND
Connect and turn ON all external equipment, such as a
cable-TV decoder, VCR, etc. Use AUTO CH. SEARCH,
if not previously used.
NOTE: TUNING BAND can only be used with ANT/
CABLE 1 or 2 Source selection.
To Use TUNING BAND
1. TUNING BAND should be selected if you followed
the "Basic Menu Operation" given in the "On-
Screen Menu" section.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LASELS
TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BA(,KGROUND
PROJO SETUP
CABLE-CAW
Selecting Tuning Band
2. Press ADJUST (ADJ) Left/Right to select the
desired tuning band, as shown below:
• BROADCAST is used for standard over-the-air
broadcasts.
• Cable - CATV is used for most standard cable-TV
(CATV) systems.
• Cable - HRC is used for cable-'l?V systems that use
HRC (Harmonically Related Carrier).
• Cable - ICC is used f.ar cable-TV systems using ICC
(Incremental CohererLt Carrier).
Available Channels per Band
The channels that are available in the broadcast and cable
tuning bands are shown below:
BROADCAST Band
VHF 2 to 13 UHF 14 to 69*
* Channels above 69 are not selectable.
CATV, HRC and ICC Bands
I to 125"*
** Channels above 125 are not selectable.
When Some Channels Are Not Clear
If some channels are not clear, change the AUTO FINE
TUNE. You may have to try 6ifferent TUNING BAND and
AUTO FINE TUNE combinations until you get a clear pic-
ture, channel-to-channel. Refer to the AUTO FINE TUNE
option for details.
AUTO FINE TUNE
Purpose
Lets your TV compensate for variations in broadcast and
cable-TV frequencies.
If you are having difficulty tuning channels, the AUTO
FINE TUNE may have to be set manually to match your
viewing needs.
Before Using AUTO, FINE TUNE
Connect and turn ON all external equipment, such as cable-
TV decoder, VCR, etc.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
-> AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
PROJO SETUP
FIXED
Selecting Auto Fine Tune
NOTE: AUTO FINE TUNE can only be used with ANT/
CABLE i or 2 Source selection.
To Use AlYrO FINE TUNE
1. AUTO FINE TUNE should be selected if you fol-
lowed the "Basic Menu Operation" given in the
"On-Screen Menu" section.
2. Pres,; ADJUST (ADJ) Left/Right to select the
desired mode of operation, as follows.
• FIXED is used to receive "over-I:he-air" TV stations,
and with many cable-TV system,;.
• SEARCH is used only when the TV must search to
find the frequency being received, such as when used
with certain VCRs and video game controllers.
When Some Channels Are Not Clear
If some channels are not clear, change the TUNING
BAND. You may have to try different AUTO FINE TUNE
and TUNING BAND settings until you get a consistently
clear picture, channel-to-chaanel. Refer to the TUNING
BAND option for details.
26s0-o 9 - 3