Manual

SETUP MENU
SI::TUPMI-NU
-_ AUTO CH. SEARCH
CH, ADDIDEL
CH, LABELS
TUNING I_,ND
AUTO FINE TUNE
CLOCK SET
CAPTION:_
CH, BACKGROUND
PROJO _;ETUP
START
!Main Setup Menu
SETUP MENU
-> CLOCK SET
CAPTIONS
CH. BACKGROUND
PROJO SE'rUP
..:--
Setup Menu for Videe and S-Video Sources
AUTO CH. (Channel) SEARCH
Purpose
Finds all available channels and stores them in memory for
access by CHANNEL Up/Down.
Use AUTO CH. SEARCH only when you first install your
TV, or when you permanently change the connections to
the TV. For example, when you replace the antenna with a
cable-TV system.
Before Using AUTO SEARCH
Connect and turn ON all external equipment, such as a
cable-TV decoder, VCR, etc.
NOTE: AUTO CH. SEARCH can only be used with ANT/
CABLE i or 2 source selection.
To Use AUTO SEARCH
1. AUTO CH. SEARCH should be selected if you
followed the "Basic Menu Operation" given in thc
"On-Screen Menu" section.
3. Use the AUTO CH. SEARCH feature inde-
pendently for each ANTENNA or CABLE signal
source connected to your TV. Select one source by
using the SOURCE MENU (ANT/CABLE 1 or 2)
and use AUTO CH. SEARCH. When completed,
select the other source and use AUTO CH.
SEARCH again.
When Some Channels Are Not Found
AUTO CH. SEARCH finds c nly active channels and stores
them in its channel memory. You can add channels to those
stored in memory by using the CH. ADD/DEL option.
If you have difficulty tuning some channels, you may have to
manually change the BAND SELECT and AUTO FINE
TUNE mode. Refer to respective option for details.
NOTE: If the output from a cable box is the input to your
TV, the only active channel will be either 3 or 4.
.
Press ADJUST (ADJ) Left/Right to start the
AUTO CH. SEARCH. The status of the search is
shown in the display. When the search is complete,
you can watch the TV program of your choice.
SETUP MENU
-->AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
PROJOSETUP
START
Selecting Auto Ch. Search
DETERMINING TUNING BAND
Determining
Tuning Band
TUNING BAND IS
CH [--'1 IS FOUND
While Searching for
Active Channels
S
AUTO CH. SEARCH HAS COMPLETEI2
TUNING BAND IS
[_CHANNELS FOUND
When Search is
Complete
CH 2
STEREO
J
When Returning to
Channel/Audio Display
,_so-o 9 - 1