Manual

REMOTE CONTROL MODEL LR4455
LEARNING MODE
Your remote can learn new functions - a total of 20 - in 4.
any or all of its four operating modes. You can teach a new
function to any button except MODE and LEARN. 5.
1. Press and hold LEARN until mode indicator lights
(about 4 seconds).
2. Enter "99" then press ENTER on the learning remote
to enter the Learning mode. All four mode indicator
lights will light momentarily. The mode indicator light
for the current mode (TV, VCR, CABLE or AUX) will
then begin flashing.
3. Place the learning and teaching remotes head to
head (on a table or other fiat surface). Press and
6.
hold any button on the TEACHING remote.
The TEACHING remote may have to be moved side-
to-side until the two remotes are aligned properly. The
remotes are aligned properly when the mode indicator
light on the LEARNING remote stops flashing and 7.
remains on continuously. Leave them in this position
until all desired functions have been learned.
Learning
Remote
I
I*---
I
1\1
l\\.
\
I
/
1
11r
_Teaching 1
Remot._______e "--'*1 I
___ _t_k j_ _ i
f, ?___;-
Use MODE on the LEARNING remote to choose
the mode for the equipment you wish i:o operate.
Press the button on the LEARNING remote you
wish to teach. The mode =,indicator light will begin
flashing.
NOTES:
• MODE and LEARN c_anot be taught.
• While the mode indicator fight is. flashing you can
change your mind and choose another button on the
LEARNING remote to be taught or change operat-
ing modes.
Press and HOLD the button on the TEACHING
remote you want the LEARNING remote to learn.
The function has been learned when all mode in-
dicator lights on the LEARNING :remote light up.
Repeat steps 5 and 6 to _each up to 20 functions.
NOTE: If you attempt to teach more than 20 func-
tions, the LEARNING remote will flash all four
mode indicator lights in a chasing manner to indi-
cate that no more butto:as can be taught. You may
now choose to:
a. Use LEARN to exit Learning :mode.
b. Re-teach a button wl_ich has already been taught
by pressing that button.
8. Use LEARN to exit the Learning mode. All four
mode indicator lights will flash three times to indi-
cate you are leaving the Learning :mode.
NOTES
• If no button is pressed for 60 seconds while in Learning
mode, the remote will automatically exit Learning mode
(all four mode indicator lights will flash three times).
• If a new brand code is progxammed in a particular mode
(TV, VCR, CABLE or AUX), all buttons in that mode
which have learned new fun ctions will need to be re-taught
those new functions.
_6__a-o 6 - 9