Manual

REMOTE CONTROL MODEL LR4455
AUTO FIND MODE!
Use Auto Find to automaticaUy fmd the brand code needed
to operate your equipment.
NOTE: If no button is pressed for 60 seconds or more
during Auto Find, the remote wiU automatically exit Auto
Find without storing any brand codes. (LEDs will flash 3
times upon exiting.)
1. Turn on the equipment you wish the remote to
operate.
2. Press and hold LEARN until mode indicator lights
(about 4 seconds).
3. Use MODE to select the mode you wish to program
(TV, VCR, CABLE or AUX). In the AUX mode
Auto Find will se,arch through all TV, VCR and
Cable brand codes.
4. Enter "00" then press ENTER within 2 seconds. All
four mode indicatoT lights will turn ON and then OFF,
leaving the mode indicator light for the active mode ON.
5. Point remote tow_Lrds the equipment.
_ECIAL PWR ON
EQUIPMENT
Poinf foward
equipmenf
LeQrning
Remofe
6. Press and release OFF/ON on the remote about once
every second, until the equipment turns OFF. Press
ENTER before pressing any other buttons.
If you press OFF/ON again before pressing ENTER
Auto Find will have to be repeated.
7. Try other buttons to see if they operate the equip-
ment. If they do not, you may wish to reenter Auto
Find and try to find another code. The remote will
begin with codes starting from where it left off prior
to exiting Auto Find.
8. Repeat Auto Find for each piece of equipment you
want your remote to operate. NOTE: Only one brand
code can be programmed in each of the four modes.
If no brand code has been entered after searching through
all brand codes in any mode, the ]LEARNING remote will
flash all four mode indicator lights in a chasing manner.
Wait 60 seconds or press ENTEF. or LEARN to return to
normal operation.
ERASE MODE
If you wish to erase learned functions or pro_ammed
brand codes. You may:
A. Re-teach a button.
B. Erase learned functions from all buttons in an
individual mode.
C. Erase learned functions from all buttons and
erase all programmed brand codes.
A. Any button except MODE and LEARN can be re-
taught at any time. See "Learning Mode" section.
B. To Erase Learned Functions from All Buttons in
an Individual Mode
1. Press and hold LEARN until mode indicator
lights (about 4 seconds). The mode indicator
light for the active mo,-le will turn ON.
2. Use MODE to select l:he mode from which all
learned functions are Io be erase, d.
3. Enter one of the following codes to erase all
learned functions in an individual mode:
198 for TV Mode
298 for VCR Mode
398 for CABLE Mode
498 for AUX Mode
Press ENTER within two seconds of the last digit.
NOTE: Any brand codes programmed into the
remote will remain.
4. All four mode indic_Ltor lights will turn on
momentarily to indicate that all learned func-
tions in the selected mode have been erased and
that you have left the Erase mode.
C. To Erase All Learned Functions and All
Programmed Brand Codes
1. Press and hold LEARN until mode indicator
lights (about 4 second.,;).
2. Enter "911" then press ENTER within 2
seconds.
3. All four mode indicaEor lights will turn ON
momentarily to indicate that the remote has left
the Erase mode. All learned functions and all
programmed codes have been erased.
The remote is now programmed with the
default Zenith brand codes as received from
the factory:
101 for TV Mode
201 for VCR Mode
3!31for CABLE Mode
3130for AUX Mode (Satellite)
u_l-o 6 - 8