Manual

REMOTE CONTROL MODEL LR4455
"THREE WAYS TO CUSTOMIZE YOUR REMOTE
'This remote allows you I:ooperate most models of most
]brands of remote-controlled TVs, VCRs and cable-TV
,decoders.
You can operate your equipment with this remote in three
ways:
• By programming brand codes for your equipment.
• By using Auto Find to automatically find the brand codes for
your equipment.
• By teaching new functions 1:o specific buttons on the
remote.
If you are using a Zenith TV, Zertith VHS/VCR or a Zenith
cable-TV decoder, it has already been programmed for you.
NOTE: The remote control can only be used to operate
one VCR, one TV and one cable-.TV decoder at a time. If
you program the remote control to operate a TV that is not
a Zenith, it wiJl no longer operate, your Zenith TV.
PROGRAMMING BRAND CODES
To program Brand Codes:
1. Find the code that corresponds to each brand and
type of equipment you are going to operate. Refer
to Tables 1, 2 and 3.
For example, if you were programming the remote
for use with a Zenith TV, you would look up
"Zenith" in "Table 1.", and find code "101."
Write the brand codes for your equipment on the
following lines. Keep this operating guide for fu-
ture reference.
TV CODE:
CABLE CODE:
VCRCODE:
2. Press MODE repeatedly to select the desired TV,
VCR or CABLE operating mode for the remote.
3. Press LEARN for about 5 seconds until the MODE
indicator lights for the selected TV, VCR or
CABLE mode of operatien.
4. Enter the proper brand code number determined in
Step 1.
5. Press LEARN. All three mode indicators should
light briefly, then turn off to indicate the brand
code has been programmed.
6. If all three mode indicators fail to ]Lightbriefly, an
error has occurred. Repeat Steps 2-5 to try again.
7. Repeat steps 2 - 5 to program the remote for the
other equipment you are using.
NOTE: CABLE mode can be programmed to operate a
second TV or second VCR, if d6sired.
When batteries are removed: It ,hill be necessary to
reprogram the proper VCR and cable-TV decoder codes.
Operating Mode
Indicators I
Numbered Buttons
Used to enter code
number for desired
brand name
LEARN Button
VaZl
_ J [_ uENU
[il N
QOIT
SELECT
® ® ®
® @ @
® @ @
@ ( E.-rE.)
-CZ) CZ) CZZ)
LEARN PtP SWAP
FREEZE U[MOR¥ TIMER
O
SOURCE
O
FLASHI_
CHANNEL
VOLUME
MUTE
CZD
SI_Q
/ Ope::ating MODE Selector
2651-O 6 - 6