Manual

REMOTE CONTROL MODEL LR4455
CABLE-TV OPERATIONS
The following functions and operations apply to a Zenith
cable-TV decoder. The remote control supplied with your
cable-TV decoder may have keys not duplicated on the new
remote. If these functions are desired, the original remote con-
trol will have to be used.
For complete information on how to operate your cable-TV
decoder, refer to the operating guide provided with it.
The remote control must be in the CABLE mode to
operate your cable-TV decoder. The VOLUME control
will always adjust the TV volume regardless of the selected
operating mode of the remote.
t
MODE
Press repeatedly to select the
VCR mode of operation.
For optimum performance, point the remote
CABLE
Lights when CABLE mode
of operation is selected. __
MENU, SELECT, ADJUST
and QUIT
Function depends on
cable-TV system.
Numbered Buttons
Used to select channels through
cable-TV decoder.
control toward your cable-TV decoder.
[] c=:9-
MENU SOURCE
[] @ o
,__LECT OUIT FLASI..I_
© @ @
_.IANNH.
@ J ENTER ) [_
CZD O _ CZD
LF_RN PIP SWAP MUTI"
_ CZ_ (ZD CZD
FREEZE MEMORY TIMER SEQ
RE-COP,D STOP PAUSE SEARCH
REW RAY F FWD
ENTER
Press after a channel number is entered
to change channel instantly.
OFF/ON
Used to tu:rncable-TV decoder
/
/ ON or OF]7.
SOURCE
Selects "A" or "B" cable channels.
CHANNEl[, Up/Down
Used to seatuence through cable-TV
channels.
VOLUME Up/Down
Used to adjust the volume level of the TV.
LR4455
Cable-TV Decoder Opertations
2651-o 6 - 4