Manual

CONNECTIONS FOR YOUR "rv
STEP 7. AN CONNECTIONS
TO AUXILIARY AN JACKS (Some Models)
Some models of TVs are equipped with an additional set of
audio and video input jacks on the back of the TV near the
top. These are provided primarily as a convenience for con-
necting a video camcorder. However, they are just as useful
in connecting VCRs or Video disc players. In addition, a
Super-Video (Y-C) jack is also provided.
To connect a S-Video VCR to these jacks:
1. Connect the Y/C-VIDEO Output cable from the
Super-VHS VCR to the S-VIDEO 2 Y-C jack.
2. Connect the Right and Left AUDIO Output from
the Super-VHS VCR to the Right and Left AUDIO
INPUT jacks. (These audio connections must be
made in order to receive sound from the VCR.)
Operation: To use these VCR connections, make sure
S-VIDEO 2 is selected in the SOURCE Menu to view this
source. To select this source, refer to the SOURCE
MENU section of this booklet.
AUDIO INPUT
VIDEO 3 IN S-VIDEO 2 IN
VIDEO INPUT
To connect a camcorder to these jacks:
1. Connect the camcorder Right/Left AUDIO OUT-
PUT into the VIDEO 3 IN Righr_ and Left audio
jacks on the TV.
2. Connect camcorder VIDEO OUTPUT into the
VIDEO 3 IN VIDEO jack on TV.
Operation: To use these c_tnacorder connex_ions, VIDEO 3
must be sele_:ted from the SOURCE MENU.
STEP 8. MAKE CONNECTIONS TO FIXED AN JACKS
The small panel of three output jacks on the back of your
TV provide "fLxed" Audio and Video output. This means
that whatever is currently being viewed on your TV, regard-
less of the source, is also provided as baseband video and
audio to these jacks.
Use these standard phono jacks to send fixed-level audio
and video signals to another component for recording or
viewing purposes. These signals are ideal for use with equip-
ment that does not have its own video tuning capability,
such as a Camcorder. You can also use these signals as
input to a second VCR if desired.
To Use the Fixed A/V Jacks:
1. Connect the VIDEO Output jack to the VIDEO
Input of the camcorder (or VCR).
2. Connect the RIGHT and LEFT AUDIO Output
jack's to the corresponding INPUT jacks of the cam-
corder (or VCR).
Operation: To use these connections, simply turn on your TV
and operate the connected camcorder (or VCR) according to
its instructions.
f
MONITOR OUT
VIDEO
LEFT
Fixed AINrJacks (Back of'INr)
265o-0 1 - 8