Manual

CONNECTIONS FOR YOUR "13/
STEP 5. MAKE EXTERNAL SPEAKER
CONNECTIONS TO TV
1. Place the SPEAKERS switch on the back of the TV
in the INT position.
2. Connect the two external speaker terminals. Ob-
serve polarity of the connections; silver speaker
wire to the red terminal and copper speaker wire to
the black terminal. Use 8-ohm speakers only.
3. Place the SPEAKERS switch on the back of the TV
in the EXT position.
4. Use the VOLUME control on the TV or on the
remote control to adjust the volume of the external
speakers.
STEP 6. MAKE SURROUND SOUND
CONNECTIONS TO TV
1. Mount and connect the optional Surround Sound
speakers by following the instructions provided
with the speakers.
2. In the AUDIO Menu, set the TV to STEREO.
3. Use the SURROUND option in the AUDIO Menu
to adjust the volume of the surround speakers.
4. Use the VOLUME control to adjust the volume of
both the TV and the surround speakers.
5. The level of the Surround sound varies relative to
the difference between the left and right-channel
stereo signals. The degree of the Surround sound
effect depends on the program source you are
using. Movies with lots of action tend to provide
greater sensation of Surround sound than may be
obtained from ,daytime programming and
newscasts.
NOTE: The surround jack is always active. Therefore, the
position of the speaker switch does not affect the operation
of surround speakers.
CAUTION: The Surround Sound output has an 8-ohm sys-
tem impedance. It is for use with two 16-ohm speakers con-
nected in parallel. Use of lower impedance speakers may
damage your TV.
ANT/CABLE 2
VIDEO 1 IN
d ob
©©
LOOP OUT
Left II ! Right
Speaker Speake_
16 ohm ] 16 ohm
SURROUND SOUND I
SPEAKERS
8 ohm Syslem
Impedance
Phono
Plug
O
ANT/CABLE 1
VIDEO
0 0
RIGHT LEFT
TO EXTERNAL AMP
SPEAKERS
INT[_EXT
VIDEO 2 IN
<fib
R L
0
S-VIDEO
O
S-VIDEO 1 IN
SURROUND
SPEAKER
L_
s_
8 _m
I Right
Speaker
8 ohm
z650-o 1 - 7