Service manual

How to Connect
- When connecting the Monitor to external equipment, match the colors of connecting ports (Video - yellow, Audio (L) - white,
Audio (R) -red).
- Connect the VIDEO INPUT socket (yellow) with the BNC-RCA adapter to the VIDEO INPUT on the Monitor.
- If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) input on the Monitor.
- If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular
VCR to the Video input.
- Use the orbiter function to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still
picture from a VCR.
If a 4:3 picture format is used; the fixed image may remain visible on the screen.
- To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor
How to View
1. Use the INPUT SELECT button on the remote control to select
VIDEO.
(If connected to S-VIDEO, select the S-VIDEO external input source.)
2. Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner’s manual)
How to Connect
- When connecting the monitor to an external source, match the colors of AUDIO/VIDEO input jacks on the monitor with
the output jacks on the audio/video equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red.
How to View
1. Use the INPUT SELECT button on the remote control to select
VIDEO.
2. Operate the corresponding external equipment. See external equipment operating guide.
How to Connect
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV program-
ming. This monitor cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the
Monitor.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
How to View
1. Use the INPUT SELECT button on the remote control and select
VIDEO.
2. Tune to cable service provided channels using the cable box.
• Component Input ports
You can get better picture quality if you con-
nect a DVD player to the component input
ports indicated below.
Component ports of the
Monitor
Y
PB
PR
Video output ports
of DVD player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
P
R
How to Connect
- Connect DVD video outputs to Y, PB, PR of COMPONENT (DVD/DTV
INPUT) and audio outputs to Audio jacks of AUDIO INPUT.
- If your DVD only has a S-Video S-video output jack, connect S-Video
of the DVD to S-Video input on the monitor and DVD audio outputs to
Audio jacks of AUDIO INPUT.
How to View
1. Turn on the DVD player, and insert a DVD.
2. Use INPUT SELECT button on the remote control to select COMPO-
NENT
. Refer to the DVD player's manual for operating instructions.
W
W
atching VCR Setup
atching VCR Setup
W
W
atching External
atching External
A/V Source Setup
A/V Source Setup
W
W
atching Cable
atching Cable
TV Setup
TV Setup
W
W
atching DVD Setup
atching DVD Setup
EXTERNAL EQUIPMENT VIEWING SETUPS