Operating instructions

CONNECTIONS FOR YOUR TV
STEP 1. MAKE BASIC CONNECTION TO TV (CONTINUED)
C. Cable-TV Connection to TV
If You Do Not Have a Converter/Decoder Box:
1. Connect the 75-ohm cable-TV input directly to
the ANT/CABLE I jack.
If You Have a Converter/Decoder Box:
1. Connect the 75-ohm cable-TV input to the •
ANT/CABLE 2 jack on the TV.
2. Connect a 75-ohm cable from the LOOP OUT
jack on the TV to the IN jack on the decoder/
converter.
3. Connect a 75oohm cable from the OUT jack on
the decoder/converter to the ANT/CABLE 1
jack on the TV.
O/3/4
OOfPlff
IN-I DECODER! t-_ll
CONVERTER
I
CABLE-TV_ z
T
I
I
I'
I
I
)©
LOOP OUT ANTICABLE 2 ANT/CABLE 1
TO DECODER
D.
Cable-TV Connection to VCR and TV
If You Do Not Have a Converter/Decoder Box:
1. Connect the 75-ohm cable-TV input directly to
the ANT/CABLE 2 jack.
2. Connect a 75-ohm cable from the LOOP OUT
jack on the TV to the antenna IN jack on the
VCR.
3. Connect a 75-ohm cable from the antenna OUT
jack on the VCR to the ANT/CABLE 1 jack on
the TV.
If You Have a Converter/Decoder Box:
1. Connect the 75-ohm cable-TV input directly to
the ANT/CABLE 2 jack.
2a. (_onnect a 75-ohm cable from the LOOP OUT
jack on the TV to the IN jack on the decoder/
converter.
2b. Connect a 75-ohm cable from the OUT jack on
the decoder/converter to the antenna IN jack
on the VCR.
3. Connect a 75-ohm cable from the antenna OUT
jack on the VCR to the ANT/CABLE 1 jack on
the TV.
IF NO CONVERTER/DECODER
CH 3/4
OUTPUT
__ DECODER/i_I
CONVERTER
or
LOOP OUT ANT/CABLE 2
TO DECODER
NOTE:
If you have a stereo VCR, you must make the A/V
connections described in Step 2 for you to hear stereo
sound while playing a tape.
258o 1 - 3