Operating instructions

MAINTENANCE AND TROUBLESHOOTING
VCR MODE CHART 1. OUTPUT TO TV FROM ANTENNA OUT JACK ON VCR
ANTENNA
OR CABLE-TV
INPUT TO VCR
START)
HERE
VCR POWER __ VCR POWER
IS OFF _,,_ATUS _--_ IS ON
_VCR POWER/;
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO TV
STEREO
AUDIO
IF "IV IS
CAPABLE
SWITCH IN TV
POSITION
t
The operatingmode of yourVCR determineswhat type of
a programsourceis provided, andwhether the audio is
stereo or monaural.Use this flow chartto determine the
operating statusof yourVCR, so that you can select the
properviewing source and channel on your"IV.Select the
VCR outputchannel (3 or 4) on yourTV to viewtapes or to
see programsselected by using the channel tuner in the
VCR.
During tape playback, we recommend you use the AUDIO
and VIDEO output jacks on your VCR for improved per-
formance.
SWITCH IN VCR
POSITION
TV/VCR switch may be
marked W/VIDEO
on some VCR=.
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO "IV
STEREO
AUDIO
IF "IV IS
CAPABLE
VCR TUNER
SELECTS
CHANNELS TO
BE SEEN ON "IV
CHAN 3/4
NO YES
't
VIDEO TAPE
PROVIDES
PROGRAM TO
BE SEEN ON TV
CHAN 3/4
MONAURAL
AUDIO
ONLY
MONAURAL
AUDIO
ONLY
VCR ANTENNA
OUTPUT TO "IV
VCRMOD_I 12 -- 3