Operating instructions

GETTING TO KNOW YOUR REMOTE CONTROL
VCR OPERATIONS
The followingfunctions and operations applyto Zenith
VCR models builtafter 1988.The remote controlsuppfied
withyourVCR may have keysnot duplicated on the new
remote.If these functions are desired, the original remote
controlwillhave to be used.
For complete details on how to operate your Zenith VCR,
refer to the operating guide supplied with it.
The remote control must be in the VCR mode to operate
your VCR.
MODE
Press repeatedly to select the
VCR mode of operation.
VCR
Lights when VCR mode of operation
is selected.
MENU, SELECT,ADJUSTand QUIT
Used with the on-screen menus and
programmingoptions of the VCR. See
VCR operatingguide for details
Numbered Buttons
Used to select a TV channel through
the VCR. Also, used to set the timer in
the VCR, and to enter programming
information.
ENTER
t
Used with the numberedbuttons to
select a TV channelthroughthe VCR.
AM/PM
Used to set timer duringprogramming.
/
MEMORY
Used to activate the VCR MEMORY
feature. See VCR operating guide for
details.
RECORD, STOP, PAUSE, SEARCH,
REW, PLAY and F FWD
Used for tape recording and playback
functions. See the VCR operating guide
for details.
For optimum performance, point the
remote control toward your VCR.
J
I
Remote Control MBR3420
VCR Operations
OFF/ON
Used to turn VCR ON or OFF.
FLASHBK (Flashback)
Press during VCR playback to view the
channel tuned by the VCR.
CHANNEL Up/Down
_ Used to select a TV channel bygoing
Up or Down through channels l_omthe
VCR.
TIMER
Activates TIME RECORD on
some VCRs.
TVNCR
Used to select the source of the
programs seen on the TV. Switches the
VCR between TV mode and VCR
mode. TV Mode: channels are selected
through the TV. VCR Mode: channels
or tape operation are selected through
the VCR.
_so 5 - 3