Operating instructions

GETTING TO KNOW YOUR REMOTE CONTROL
OPERATION
The multi-brand remote control supplied with your new
Z,enith TV allows you to operate most models of infrared
(IR) remote-controlled TVs, VCRs and cable-TV
decoders, even if they are all different brands. In this way,
it takes the place of the several remote controls previously
needed.
Your multi-brand remote has already been programmed to
operate your new Zenith TV, a Zenith manufactured cable-
TV decoder and a Zenith VHS VCR. It must be
programmed to operate other brands of equipment.
The following instructions are for the operation of Zenith
equipment. The instructions for using this remote with non-
Zenith equipment are in the section entitled "Programming
Your Remote Control."
CHOOSE THE OPERATING MODE
To use the remote to operate your TV, CABLE-TV
decoder or a VCR, you must first choose the mode of
operation of the remote. To select TV, CABLE or VCR
mode, press the MODE key until the corresponding in-
dicator lights.
Some controls on the remote, like PLAY and VOLUME,
will always operate the VCR or the TV. Whether other keys
operate the TV or VCR depends on which mode of opera-
tion the remote control is in. For example, OFF-ON will
turn the VCR on and off while the remote control is in the
VCR mode. It will turn the TV on or off while the remote
control is in TV mode.
Operating MODE switch
and indicators
Menu operations on TV
and some VCRs
Numbered buttons for
channel selection and
other uses
NOTE: See following pages
for operating instructions.
f--_q f-_-q
,0J.[]
SELECT QUIT
@®®
®®®
®®®
C::D C=D C:D
A B
_ C:::D C:D
IdEMOl_' TIMER
C:=D C]D C:K:)
C_ED (:_D (::3ED
I_W PLAY F FWD
OFT ON I
f t i
SOURCE
0
CHANNEL
VOLUME
CD
MUTE
C_D
SEARCH
CZD
I'V/VCR
£
MBR3420
Controlled device OFF/ON
Special features on TV and
some VCRs
Channel Up/Down for TVs,
VCRs and cable
Volume Up/Down for TV
Special features on some
TVs and some VCRs
:_8o 5 - 1