Operating instructions

OPERATING YOUR TV
BASIC TV OPERATIONS r .
Selecting Channels Using CHANNEL Up/Down:
You may select a channel through channel scanning by
using CHANNEL Up/Down keys. Only channels stored in the
channel scan sequence can be selected.
Selecting Channels by Using Numbers on Remote: Press
the numbers corresponding to the channel desired, then
press ENTER. Any channel in the band chosen can be
selected through direct number entry.
FLASHBK (Flashback) on Remote:
Press FLASHBK to return to the last TV channel you were
watching.
Adjusting Volume: You can adjust the volume of your TV
by using VOLUME Up/Down.
Muting Volume: To mute the sound coming from your TV,
press MUTE on the remote control. To restore sound,
press MUTE again.
After an Extended Power Outage: If you previously used
AUTO CH. SEARCH, you do not have to use it again un-
less you permanently changed the connections to the TV.
All of the channels previously found are stored in protected
memory, and are not affected by a power outage. However,
the clock must be reset to the current time.
CH2
STEREO
J
Channel/Audio Display
(Before Clock is Set)
CH2
10:56
MUTED
_Channel/Time Displa;
While TV is Muted
MUTED
CH 2
10:56
STEREO
Cbannel/Time/
Audio Display
(After Clock is Set)
f
VOL
Volume Display *
VOL or MUTED display is
shown only when captious are
not being displayed.
J
Mute Display *
SLEEP TIMER
The remote control is equipped with a TIMER button that
provides access to the SLEEP TIMER available with some
TV models. By using the SLEEP TIMER, you can pro-
gram the TV to automatically shut off after a 15 minute
period up to 4 hours.
To Set SLEEP TIMER
1. Press TIMER to see status display
2. Press TIMER repeatedly until you reach desired
shut-off time.
o
3.
One minute before the TV shuts off, the GOOD NIGHT
display appears on the screen. At this time you have a
choice of the following three actions.
1. Do nothing. The TV will turn off in one minute.
The display "counts down" the remaining seconds.
Remove the GOOD NIGHT display by pressing
ENTER. The TV will still shut off in one minute.
Delay the shut off by pressing TIMER to select a
new shut-off time.
To Cancel the SLEEP TIMER
1. Press TIMER repeatedly until the status shows
OFF.
NOTE: The SLEEP TIMER resets to OFF when you turn
off the TV.
vSLEEPMER vSEPMER
0:]5 GOOD NIGHT
0:58
Sleep Timer Display "Good Night" Display
2sso 3 - 1