Owner`s manual

Selecting PC screen size input signal
Press the menu button and move the pointer button up or down to select the SPECIAL menu
as below.
● When using the PC input mode, before turning on the PC, select the appropriate screen size in the SPE-
CIAL menu. This will enable the image size of the PC in DOS mode to fit on the projection screen.
● For other screen size signals except 640X400 70Hz and 720X400 70Hz, the projected image sizes are
adjusted automatically.
1
Press the enter button and move the pointer button up or down to select the VGA Text item.
2
Move the pointer button left or right to select the screen size you want to use.
3
● a. Selecting 720X400
: If the input signals are 720X400 70Hz or 640X400 70Hz , the projected image size will always be adjust-
ed to the format of 720X400 70Hz.
b. Selecting 640X400
: If the input signals are 720X400 70Hz or 640X400 70Hz , the projected image size will always be adjust-
ed to the format of 640X400 70Hz.
● To exit menu display, press the menu button repeatedly.
exit move enter
MenuMenu
G VIDEO
G POSITION
G SPECIAL
G TRACKING
exit move select
MenuMenu
G VIDEO
G POSITION
E SPECIAL
Language
Flip Horizontal
Flip Vertical
Blank Image
Lamp Time
VGA Text
G TRACKING
720X400
G
35