Owner`s manual

14
Basic Operation of the Projector
Basic Operation of the Projector
1
1. Place the projector on a sturdy and horizontal
surface with the PC or AV source.
2
2. Place the projector in the correct distance
from the screen. The distance between the
projector and the screen determines the actu-
al size of the image.
3
3. Turn the projector so that the lens is at a right
angle to the screen. If the projector is not at a
right angle, the screen image will not be square.
At this time adjust position of image.
(Refer to page 37.)
4
4. Connect the cables of the projector to a 120V,
60Hz wall power socket.
Screen size
Horizontal distance from
projector to screen
610x460cm(300inch) 12.55m-16.35m
410x300cm(200inch) 8.35m-10.87m
200x150cm(100inch) 4.16m-5.42m
160x120cm(70inch) 2.90m-3.78m
120x90cm(50inch) 2.06m-2.69m
81x61cm(40inch) 1.64m-2.15m
POWER
MENU
SOURCE BLANK
ENTER
VOL- VOL+
INSTALLATION AND
CONNECTION