Operating instructions

12 200668-02
WARNING:Riskof re.Donotaim thelampsat a
combustible surface within 3 ft. (1 m).
CAUTION: To avoid water damage and electrical shock,
keep lamp holders 30° below horizontal.
CAUTION: Do not exceed the maximum load limits
listed above.
9. Adjust the lamp holders by loosening the lock nuts. Note: Do
not rotate the lamp holders more than 180° from the factory
setting.
10. Screw incandescent bulb up to rated wattage into module.
When screwing in the lamps, do not overtighten.
11. Check operation. Activate transmitter being used with receiver
(see transmitter instructions). A signal will be sent to the receiver
to turn the receiver ON or OFF.