Instruction manual

27
206-4081-C
Quick Reference Guide: Using TV/STB to Create Channel Map for Master TV/STB Setup
Experienced Software Installer LMT7Z7 Card FTG Mode Setup Procedure
Creating a Master TV/STB LMT7Z7 (Z7) Card Setup
Directly on TV/STB
1. Download the FTG Configuration Application from
the LG website.
2. Load FTG Configuration program onto the PC that
will be used to configure Z7 cards.
3. Set up TV/STB Installer Menu settings with IR
remote.
4. Perform channel scan on the TV/STB to create a
TV/STB channel map.
5. Install Z7 card into TV/STB.
6. With PC, ‘Learn’ master TV setup into FTG Card and
FTG Configuration Application. (See pages 9 and
13) This will convert Z7 card to FTG mode and
card will acquire the Installer Menu settings from
the TV/STB it is installed in. Note: Requires spe-
cial cable.
7. Remove configured Z7 card from master TV/STB
and install a virgin pass-through mode Z7 card.
The master TV/STB Installer Menu settings will be
transferred into the new card, after the FTG
Channel Map is written and the Z7 card is con-
verted to FTG mode.
Once a Z7 card is configured in the master TV/STB
for FTG mode, it can removed and installed in a
target TV of same model. Each target TV/STB, with
replicated Z7 card, will then function exactly like
the master.
Options
• If an FTG Channel Map ‘Learn’ was performed, the
FTG Channel Map should be saved for future use. The
Installer Menu settings can be ‘Read’ and saved for
future use. If changes to either the FTG Channel Map
or Installer Menu settings are necessary using the
FTG Configuration Application, each should be writ-
ten back to the FTG card and TV/STB. The changes
should also be saved in file created.
Configuration
PC
FTG
Configuration
Application
Target TV/STB
With Configured
Z7 Card
Target TV/STB
With Configured
Z7 Card
Target TV/STB
With Configured
Z7 Card
Target TV/STB
With Configured
Z7 Card
Channel Map
Installer Menu
Target
TV/STB
Configured
FTG Mode
Z7 Card
Same Model
Install
Card
Channel Map
Installer Menu
Z7 Card
Remove
Card
Channel Map
Installer Menu
'FTG Mode' Z7 Card
Master
TV/STB
(Do Channel
Scan)
Channel Map
'Learn'
Pass-thru
Mode
Z7 Card
Install
Card
Fully Configured
FTG Card
Master
TV/STB
Master
TV/STB
Master
TV/STB
Alternate Procedure
Channel Map and Installer
Menu Items are created in
Master TV. Channel Map and
Installer Menu items are
‘Learned’ by FTG Configuration
Application and then ‘Written’
to Target TVs with Z7 cards
installed.