Instruction manual

26
206-4081-C
Quick Reference Guide: Using PC to Create Channel Map for Master TV/STB Setup
Experienced Software Installer LMT7Z7 Card FTG Mode Setup Procedure
Creating a Master TV/STB LMT7Z7 (Z7) Card Setup
1. Download the FTG Configuration Application from
the LG website.
2. Load FTG Configuration program onto the PC that
will be used to configure the Z7 cards.
3. Set up TV/STB Installer Menu settings with IR
remote.
4. Create an FTG Channel Map for the TV/STB with
the FTG Configuration program. (See page 7)
5. Install Z7 card into TV/STB.
6. With PC, configure Z7 card installed in TV/STB to
be the master with an FTG Channel Map to convert
it to FTG mode. Note: Requires special cable. Once
converted to FTG mode, the Z7 card will acquire
the Installer Menu settings from the TV/STB it is
installed in.
7. Remove configured Z7 card from master TV/STB
and install a virgin pass-through mode Z7 card.
The master TV/STB Installer Menu settings will be
transferred into the new card, after the FTG
Channel Map is written and the Z7 card is con-
verted to FTG mode.
Once a Z7 card is configured in the master TV/STB
for FTG mode, it can removed and installed in a
target TV of same model. Each target TV/STB, with
replicated Z7 card, will then function exactly like
the master.
Options
Installer menu settings should be read from FTG card
using FTG Configuration Application and saved for
future use. Any Installer Menu setting changes
should be made using FTG Configuration Application
and written to FTG card and TV/STB
.
Configuration
PC
FTG
Configuration
Application
Target TV/STB
With Configured
Z7 Card
Target TV/STB
With Configured
Z7 Card
Target TV/STB
With Configured
Z7 Card
Target TV/STB
With Configured
Z7 Card
Channel Map
Installer Menu
Target
TV/STB
Configured
FTG Mode
Z7 Card
Same Model
Install
Card
Channel Map
Installer Menu
Z7 Card
Remove
Card
Channel Map
Installer Menu
Z7 Card
Channel Map
Master
TV/STB
Z7 Card 'FTG Mode'
Channel Map
'Write'
Pass-thru
Mode
Z7 Card
Install
Card
Fully Configured
FTG Card
Master
TV/STB
Master
TV/STB
Master
TV/STB
Recommended Procedure
Installer Menu Items are set up
in a master TV. The Channel Map
is created with the FTG
Configuration Application. Use
the FTG Configuration
Application to ‘Write’ the
Channel Map into each Z7 card
installed in the master TV. Each
Z7 card is converted to FTG
mode when the FTG Channel Map
is written. Once configured FTG
cards are installed in target TVs
they are ready for operation.