Instruction manual

17
206-4081-C
LMT7Z7 Card Free To Guest (FTG) Mode Overview
Purpose
• To provide commercial TV/STB’s with a way to map
Logical channel numbers to Physical or Virtual
channels.
• To provide the forensic marking for Pro:Idiom
encrypted programs. This enables Pro:Idiom
decryption in the TV/STB.
• To provide an easy means to set the date and time
of the TV/STB.
If multiple TV/STBs of the same model are to be con-
figured with LMT7Z7 cards for the purpose of Free-
To-Guest, set up a "master" TV/STB with the desired
Installer Menu settings before installing the new
LMT7Z7. Each new LMT7Z7 card installed into the
master TV/STB and set to FTG mode will obtain the
Installer Menu settings from the master. The config-
ured LMT7Z7 card can be removed from the master
and installed in a TV/STB of the same model which
will then be configured by that LMT7Z7 to be ready
for operation.
Compatibility
The LMT7Z7, is compatible with the following
products.
* For models not listed check with Customer Support
Call 1 - 888 - 865 - 3065
For products that are not listed, the Configuration
Application will only be able to make changes to a
limited number of Installer Menu items. It is recom-
mended that Installer Menu items be set on the
TV/STB using the IR remote control. These products
will, however, be able to accept the channel map and
the date and time from the FTG Configuration
Application.
Specifications
• 141 Channel entries.
• Maximum Logical Channel Number = 4095*
*Software limits this to 999 to enhance performance
LMT7Z7 FTG Card Limitations
The LMT7Z7, does not take the place of a clone box
where the setup learned from a master TV/STB can
be replicated into other TV/STBs. The LMT7Z7, how-
ever, can replicate some items but not all.
Items That Can Be Replicated
• Installer Menu settings initially transferred to FTG
card when inserted into a TV/STB.
• Installer Menu settings that were written by the
FTG Configuration Application.
• Channel lineup written by the FTG Configuration
Application.
• Aux labels if initially learned from the TV/STB that
has been set up with the labels. (Aux labels are
not transferred between the PC and the FTG card,
therefore they cannot be saved in the configura-
tion file.)
Items That Cannot Be Replicated (Refer to TV/STB
Manual)
• Settings from the TV/STB’s Main Setup Menu.
• 20LH1DC1
• 22LG3DCH
• 26LG3DCH
• 26LH1DC1
• 26LH1DC3
• 26LH1DC4
• 32LC5DC
• 32LC50C
• 32LG500H
• 32LG700H
• 32LH1DC1
• 32LG3DCH
• 32LX5DC
• 32LX50C
• 32LX50CS
• 37LC5DC
• 37LC50C
• 37LG500H
• 37LG700H
• 42LB5DC
• 42LB50C
• 42LC5DC
• 42LC50C
• 42LG500H
• 42LG700H
• 42PG60C
• 42PX7DC
• 42PX8DC
• HCS5610
• HCS5650
• L20V54S
• L26W56
• L26W58