Service manual
CM154 - 923-03488 10 L20V26 - MENUS
USER MENUS
Press the volume up button to begin the channel
search. Wait for auto program to complete the channel
search cycle before choosing a channel. The TV scans
for over-the-air channels and then channels provided
by a cable service.
If you press the enter button during auto
programming, the function will stop and only channels
found up to that time will be added. When the channel
search is complete, use the channel up/down buttons
to review the memorized channels.
MANUAL PROGRAM
You can select Memory to add the channel or Erase to
delete the channel from memory.
Auto Program
Manual Program
Fine
Manual
Program
Use And
Use the menu button to select the menu shown and
then use the channel up/down buttons to select the
Manual Program option. Press the volume up/down
buttons.
Manual Program
TV 7 Memory
TV 7 Memory
Use And
The current channel number is displayed. Use the
channel up/down buttons to select a channel you want
to add to memory or erase and then use the volume
up/down buttons to select Memory (add) or Erase
(delete). Each time you press the volume up/down
buttons, you toggle between Memory and Erase.
Erase
Manual Program
TV 7 Memory
TV 7 Memory
Use And
Press the enter button to select and exit. The current
channel is added to Memory or Erased from the channel
list.
SLEEP TIMER
Sleep timer turns the TV off at a preset time. Use the
sleep button to set sleep timer. Each press of sleep
changes the setting as shown below.
10
20
30
60
---
240
180
120 90
Sleep
---
Use
And
To cancel sleep time setting, press the sleep button
repeatedly to select [ — ]. When a sleep time you
want is displayed on the screen, let the screen display
disappear and the sleep time is set.
To check remaining sleep time, press the sleep button
once. If you turn the TV off after setting sleep timer,
the setting will be erased.
AUDIO SETUP
Balance 0
AVL Off
DASP User
Equalizer
MTS Mono
AVL SETUP
AVL (Auto Volume Leveler) maintains an equal volume
level automatically even if the channel is changed.
Use the channel up/down button to select the AVL
option. Use the volume up/down button to select on
or off and then press the enter button.
SOUND BALANCE
Use the channel up/down button to select the Balance
option. Press the volume up/down button to adjust
the balance and press the enter button to save. Balance
is preset at 0 (center).
SAP (SECOND AUDIO PROGRAM)
SAP contains the secondary language signal in addition
to the primary language. There are the primary and
secondary languages and stereo modes in bilingual
signal.