Direct View TV Operating Guide

26
Labeling channels
Select a channel you want to label.
Press
or
to select “SET/
CLEAR”. Press
or to select
“SET”.
Press MENU, then press or
to select (OPTION) menu.
Press
or to select “CH
LABEL”, then press
or . The
CH LABEL menu will appear.
1
2
3
Press ENTER to select “LABEL”.
Then press
or to enter a
character in the first space. Press
the button repeatedly until the
character you want appears on
the screen.
Channel labels appear over the
channel number display each time
you turn on the TV, select a
channel, or press -/DISPLAY.
You can choose any four charac-
ters to identify a channel.
To create channel labels
If the character which you desire appears, press ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name, you must
choose the empty space from the list of characters; otherwise, a
dash will appear in that space.
When you finish inputting the label name, press ENTER.
4
5
Press EXIT to return to the normal screen.
To erase channel labels
1
Select a channel with a label which you want to erase.
2
Press MENU, then press or to select (OPTION) menu.
Press
or to select “CH LABEL”, then press or to
display the CH LABEL menu.
3
Press or to select “SET/CLEAR”. Press or to select
“CLEAR”, then press ENTER.
4
The characters rotation
as follows:
Repeat steps 1-5 for other channels. You can assign a label to each
channel.
6
OPTION
ON / OFF TIMER OFF
CH LABEL
:SELECT :ADJUST
CH LABEL : CH 23
SET / CLEAR
LABEL ––––
OPTION MENU
:SELECT :ADJUST
ENTER : SET EXIT : END
CH LABEL : CH 23
SET
LABEL A –––
OPTION MENU
:ADJUST ENTER : SET
EXIT : END
Press EXIT to return to the normal screen.
5
Repeat steps 1-4 to erase other channel labels.
PICTURE
SIZE
-/
NOTE:
To return from CH LABEL menu to
OPTION menu, select “OPTION
MENU”, then press
or .
J3W41321A_En_P25-30 24/03/2006, 2:24 PM26